Shoe Sole Bending Tester

• 

Product information：

The Footwear Flection Tester is supplied in both single or twin station models and the operation simulates the flexing of footwear during wear. The angle of flex is adjustable up to 50°.

The machine may be used to predict the adhesive failure and cracking of footwear in wear. It is particularly useful in assessing problems associated with the sole structure.

Footwear is clamped to the machine at the toe end by using the appropriate toe clamp from one of five pairs supplied. The heel end is secured to the flexing bar. A predetermining counter is fitted and once the appropriate number of flexes has been registered, the machine will stop so that the shoe can be inspected.

The moving parts of the machine are covered by a hinged guard which is fitted with the latest safety device to prevent access while the machine is still in use. The machine is robust and non-corrosive materials are used in the relative components required..

A similar machine is available for testing high leg boots where water depth can be increased to cover the whole forepart of the footwear, highest to the metal ring area. Details available on request.

Applications：

TheFootwear Flection Testeris designed to assess the flexing endurance of overall footwear in wet and dry conditions.

Shoe bending durability testerStructure:

The machine is composed of:

a) Plate forced to oscillate with a frequence of 140 times of oscillation/minute.

b) Two adjustable artificial feet either in size and position

c) Digital cycle counter, with a reset function, to set the desired number of cycles for the test.

d) An angle regulation with adjustable zero start point.

e) A water container with a samll pump, connected to the workstation which allows to keep wetting the sole of the loaded sample shoes. (for wet tests please use the cover)

f)Control panel can perform the switching of instrument working state and the setting of counter, including: a general magnetothermic switch, a Start button, a Stop button, a Manual button, a Reset button, a programming cycle counter.

Другие товары поставщика

	Textile Point-to-Point Resistivity Tester	It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Special Labor Protectiv...
	Safety hat antistatic performance tester	Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety ha...
	Bag opening machine	Scope of application: Single lip bags, double lip bags, zipper bags, side pockets, flaps, pocket openings, collars, etc. are cut and sewn. Machin...
	Strength Tester for Safety Helmet Chin - strap	Strength Tester for Safety Helmet Chin - strap - Other test instrument - standard Standards: GB/T 2812-2006, GB/T 2812-XXXX, GB/2811-2019 ...
	Fabric Bursting Strength Tester	Standards: ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424 BS 3137、BS 4768、AS 2001.2.4、GB/T 7742 IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922 FZ/T 6...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...