Wire Torsion and Winding Tester
Все товары поставщика
Product Introduction:
Metal wire twisting and winding machine is widely used in aerospace, metal material processing, tire manufacturing and other industries, as well as colleges and universities, scientific research institutions, technical supervision, quality inspection stations and other departments.
According to the criteria:
GB/T 2611-2007 "Testing machine general technical requirements"
ISO 7800:1984 Test method for unidirectional torsion of metal wires
ISO 9649:1990 Test method for bidirectional torsion of metal wires
GB/T 3428-2002 "Zinc-coated steel wire for overhead stranded wire - Winding test - torsion test"
GB/T 239-1999 "Torsion Test of Metal Wire"
GB/T 2979-2020 "Metal materials wire winding test method"
Product Advantages:
Dual Functionality: Performs both torsion and winding tests on a single machine, offering versatility and saving space.
Comprehensive Wire Evaluation: Provides a more complete picture of the wire's mechanical properties and formability.
Standard Compliance: Enables testing according to multiple relevant national and international standards.
Efficiency: Streamlines the testing process compared to using separate machines for each test.
Quality Assurance: Essential tool for quality control in wire production and related industries.
Controlled Testing: Allows for precise control of test parameters for repeatable and reliable results.
Main parameters:
1, torsion sample size: diameter 1mm-10mm; Winding sample size: diameter 1mm-6mm
2, the marking distance between the two plus heads: 0-500mm, adjustable
3, twisting/winding speed: 0-2.0r/s, adjustable, error <±10%
4, power supply voltage: AC220±10%/50Hz
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
G631A electric shoe stripping testing machine | Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the... |
 |
Creep testing machine with full incision/ Full-Notch Creep Tester / FNCT Creep Testing Machine | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable... |
 |
PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a... |
 |
Protective Clothing Flame Spread Test Machine | Protective clothing flame spread testeris designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It c... |
 |
Seat Ingress/Egress Simulation Tester | Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for S... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
