.

Mechanical load testing machine for photovoltaic modules

Mechanical load testing machine for photovoltaic modules
  • Mechanical load testing machine for photovoltaic modules
Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd

Все товары поставщика
Отправить запрос, связаться с поставщиком

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules
  • UL 1703: Flat-Plate Photovoltaic Modules and Panels
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Multi-Standard Compliance
    • 5,400 Pa Forward / 2,400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.
    • 1,000 Pa Dynamic Testing: 1,000-cycle fatigue simulation for hail/debris impact.
  2. Ultra-Precise Control
    • 0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.
    • 7+3s Cycle Timing: Mimics real-world pulsating wind loads.
  3. Automated Testing
    • Programmable Cycle Count: 1–99,999 cycles with auto-stop at failure.
    • AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.
  4. Safety First
    • Emergency Shutoff: Dual redundant safety circuits with load cell override.
    • Overload Protection: 6,000 Pa max pressure cutoff.
  5. Modular Design
    • Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.
    • Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

  • Dual-Mode Operation: Static/dynamic load testing with auto-switching.
  • 10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.
  • Self-Calibrating System: Auto-tare and linearity checks before each test.
  • Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Technical Parameters

ParameterSpecification
Test Area 2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load 5,400 Pa (adjustable)
Reverse Load 2,400 Pa (adjustable)
Dynamic Load 1,000 Pa, 1,000 cycles (7s+3s timing)
Pressure Accuracy ±5% of setpoint
Force Sensor 0.1N resolution, 10 kN capacity
Power Supply 230V AC, 50/60Hz (single-phase)
Air Supply 6–8 bar (clean/dry air required)
Weight 1,200 kg (net) / 1,500 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x PV module clamping fixtures (adjustable for 16–40 mm frames).
    • 10x load distribution pads (anti-skid rubber).
  2. Software Suite:
    • License key forLoadTest Pro(Windows/Linux).
    • 1-year free access to cloud-based fatigue analysis tools.
  3. Calibration & Safety:
    • NIST-traceable pressure gauge.
    • Safety harness kit for large modules.
  4. Maintenance Kit:
    • Spare O-rings and cylinder seals.
    • Machine cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.


Отправить запрос, связаться с поставщиком

Кому: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Fully automatic membrane pore size analyzer
 Fully automatic membrane pore size analyzer Standards: ASTM316, GB/T32361-2015 Applications: Scope of use: Suitable for samples of various materials such as polymers, ceramics, glas...
Reciprocating Friction and Wear Testing Machine
 Reciprocating Friction and Wear Testing Machine Materials Science Research Research the friction and wear properties of various materials, including metals, non - metals, and composite materials...
Helmet Surface Friction Testing Machine/ Helmet surface friction tester
 Helmet Surface Friction Testing Machine/ Helmet surface friction tester The Helmet Surface Friction Testing Machine In the critical realm of head protection, a helmet's primary role is to absorb and deflect impact fo...
Floor Material Burning Performance Tester
 Floor Material Burning Performance Tester Standards: ASTM E648-15 Standard test method for critical radiant flux of floor-covering systems using radiant heat energy source BS EN ISO Rea...
Respiratory Resistance Tester
 Respiratory Resistance Tester Standards: · GB/T 2626-2006 Respiratory protective equipment -- non-powered air-purifying particle respirator - 6.5 6.6 · GB/T 326...
Все товары поставщика

Похожие товары

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Продавец: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
 Surface Performance Tester STD-FB4 - A Продавец: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Продавец: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Продавец: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Продавец: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...