Roughness profiler

• 

Product Introduction:

The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measurement. Its main advantage is that it can directly measure the surface of some parts that are difficult to measure, such as the surface roughness of holes, slots, etc., and can directly read or describe the shape of the surface contour curve according to some evaluation standard, and the measurement speed is fast, the results are reliable, the operation is easy to measure the plain line shape of various precision machinery parts, straightness, Angle, crown logarithm curve, depth, width and other parameters.

Optional:

The double needle profiler detects the middle diameter of thread, groove diameter and inner diameter.

Product features:

This series of instruments are widely used in machining, motor, auto parts, motorcycle parts, precision hardware, precision tools, tools, molds, optical components and other industries. Applicable to scientific research institutes, universities, metrology institutions and enterprises measuring rooms, workshops. Measuring bearing, needle roller, roller, motor shaft, crankshaft, cylindrical pin, piston pin, piston, valve, valve, gear, oil pump nozzle, hydraulic parts, pneumatic parts, spinning machine accessories, etc.

Technical parameters:

Measuring range :X direction :100mm, contour measuring range :20mm, 40mm, 60mm

Z-axis operating height :400mm

Minimum measuring hole :25mm

Linear accuracy :±(1.2+10.15H|)um

Arc :±(1.5+R/12)um

Angle :±1'

Straightness :0.5um/100mm

Optical resolution :0.01um

Measurement speed (contour)：0.02mm to 4.0mm/s

Climb Angle: up 77 degrees, down 88 degrees

Другие товары поставщика

	Intelligent fiber heat shrinkable tester FZ / T-T50004-1991	Standards: GB / T6505-1986; FZ / T-T50004-1991 Applications: used to measure a variety of chemical fibers and natural fibers in the dry heat, hi...
	Lateral Rigidity Tester for Safety Helmets	Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deforma...
	Photovoltaic module outdoor exposure test system	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe...
	HapLog Finger Tactile Sensor	HapLog sensor is a “sensor that measures natural finger operations” with a built-in contact force sensor and a 3-axis acceleration sens...
	Cold Fold Tester Chrysler	Standards: LP-463-KB-28-01 Method A Applications: This tester is applied to the cold fold test based on Chrysler method and can measure the resi...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...