Automotive Seat Belt Buckle Bending Test Machine
Standard
ISO 10195(Seat Belt Anchorage Hardware - Test Methods)
ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restraint Systems)
FMVSS 209(Federal Motor Vehicle Safety Standard for Seat Belt Assemblies)
Product Advantages
Precision Fatigue Testing
High-resolution angular encoder (±0.01° accuracy) captures subtle buckle deformation, critical for ensuring post-crash functionality.
Automated Test Cycles
Programmable waveforms simulate decades of real-world usage (e.g., daily buckling/unbuckling) in days.
Advanced Safety Analytics
AI-powered software predicts failure modes, tracks wear patterns, and generates ISO/ASTM-compliant reports automatically.
User-Centric Design
15.6-inch touchscreen interface with multilingual support (English, German, Chinese, Spanish) and one-touch test protocol selection.
Industrial Durability
Corrosion-resistant frame, IP65 enclosure, and anti-vibration feet ensure long-term reliability in demanding labs.
Product Features
Multi-Mode Testing:
Bending Fatigue: Applies oscillating torque (0–10 Nm) at angles up to ±90°.
Load Retention: Measures buckle latch force after 100.000+ cycles.
Temperature Control: -30°C to +80°C chamber for accelerated aging tests.
Real-Time Monitoring:
High-speed cameras (2.000 FPS) capture latch engagement and spring fatigue.
Data Management:
Cloud-compatible software stores 100.000+ test results, generates ECE/FMVSS reports, and supports barcode scanning.
Universal Specimen Compatibility:
Adjustable clamps accommodate all buckle types (push-button, lever-release, electronic).
Technical Parameters
| Parameter | Specification |
|---|---|
| Bending Angle Range | ±90° (±0.01° resolution) |
| Torque Capacity | 0–10 Nm (±0.005 Nm accuracy) |
| Frequency Range | 0.1–15 Hz (adjustable) |
| Temperature Control | -30°C to +80°C (±0.5°C accuracy) |
| Data Acquisition Rate | 150.000 Hz (angular/load channels) |
| Power Supply | 220V/110V AC, 50/60Hz, 2.5kW |
| Dimensions (L×W×H) | 1.3×0.9×1.8 m |
| Weight | 380 kg |
| Operating Environment | 5–40°C, ≤85% RH (non-condensing) |
Accessories Included
Specimen Clamps: Adjustable fixtures for push-button, lever-release, and electronic buckles.
Calibration Kit: Torque sensor, angular encoder, and NIST-traceable certification.
Safety Gear: Heat-resistant gloves, face shield, and emergency eyewash station.
User Manual & Software: Digital guide (multilingual) + AI analytics platform for fatigue life prediction.
Environmental Chamber: Temperature-controlled enclosure with antifreeze additive.
Ideal For:
Automotive OEMs (seat belt manufacturers, safety systems R&D labs)
Regulatory testing agencies (ECE, FMVSS compliance)
Aerospace seating durability testing
Consumer product safety laboratories
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Seam Fatigue Tester for Textile & Apparel Durability | Standard ISO 13935-1/2(Textiles – Seam Fatigue Testing for Woven Fabrics) ASTM D1683(Standard Test Method for Failure in Sewn Seams of Wove... |
 |
Roughness profiler | Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur... |
 |
Limiting Oxygen Index Tester | Limiting Oxygen Index Tester The oxygen index of the material refers to the minimum oxygen concentration that can maintain the combustion of the ma... |
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Impact strength tester for car seat headrest | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
