Helmets Designated Protection Areas Tester

• 

The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all testing standards. It can define the upper, lower, left, and right fields of vision of the helmet, ensuring the helmet's effectiveness under different testing standards.

Application

1. Used to mark test points and test lines on helmets.

2. Used for line - marking according to different test standards.

3. Used to define the upper and lower fields of view as well as the left and right fields of view of helmets during research and development.

Standards:

GB 811-2010:Helmets for motorcyclists

Feature:

Infrared emitter;

Aluminum bracket (adjustable);

Angle of infrared bracket can be adjusted;

Aluminum alloy is used in the machine and all the accessories;

Main machine performance characteristics:

Adjustable handles on the arm can be easily adjusted to apply to different testing standards.

The fixed point tracking indicator adopts infrared control, which can be moved on the machine to find the base plane and reference plane easily.

The head support is made of steel with galvanized surface treatment, and there is a limiting device every 45°, which can easily rotate the head in any direction to adapt to different test points and test standards.

Parameters

Accessoriess

The following are the names of the accessories for the helmet-designated protection area tester (using a helmet point and protection zone testing device as an example):

Infrared transmitter

Aluminum alloy bracket (adjustable type)

Working arm (with adjustable handle)

Tracking indicator light (infrared controlled)

Head-shaped support (steel with galvanized surface treatment, with limiting device)

Test Procedures

Helmet Installation: Mount the helmet onto the support frame of the testing equipment.

Applying Force: Apply a specific force using a force gauge for the impact test.

Data Recording: According to national standards, record the helmet's impact resistance, including cushioning performance and impact durability.

Testing Field of View and Protection Area: Use a field of view testing component and a laser emitter to test the helmet's field of view angle and protection area.

Data Analysis: Based on the test results, analyze whether the helmet's protective performance meets the requirements specified in the standards.

Другие товары поставщика

	Mattress Durability Fatigue Testing Machine	Product Description Mattress durability testing machine. This test is mainly used to evaluate the resistance to fatigue pressure and surface wear ...
	Multiphase High - temperature and High - pressure Explosion Limit Tester	Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: Technical parameters: Operating Environment (...
	UV Sterilizer	Product introduction of Environmental test chamber Ultraviolet disinfection technology is the latest generation of disinfection technology emergin...
	Catheter Leakage and Compliance Tester	The Catheter Leakage and Compliance Tester is a professional testing device used to evaluate the expansion capacity (compliance) and leak resistanc...
	Spring torsion fatigue tester	Product Introduction: Spring torsional fatigue testing machine (horizontal) is a new type of automatic torsional fatigue testing machine with digi...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...