Battery Adiabatic Calorimeter

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Battery adiabatic calorimeters play a crucial role in battery research and development, providing essential thermodynamic data for safety assessment, performance optimization, energy efficiency analysis, and lifespan prediction.

Application

Battery adiabatic calorimeters are widely used in the research, testing, and safety evaluation of batteries and battery packs. They can provide thermal characteristic data of batteries during charging and discharging processes, offering crucial support for battery design and optimization. These instruments play a key role in battery thermal safety assessment, thermal management system performance evaluation, and material thermal safety testing.

Standards

GB/T 36276 - 2023:Lithium-ion Batteries for Electric Power Energy Storage

UL 9540A:Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems

ASTM E1981 - 98(2012):Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry (DSC)

SN/T 3078.1 - 2012:Guidelines for the Evaluation of Thermal Stability of Chemicals - Part 1: Accelerated Calorimetry Method

USABC SAND99 - 0497:This is a specific test protocol document from the United States Advanced Battery Consortium (USABC), and it doesn't have a widely recognized single "English name" in the same sense as formal standards. It could be referred to as "USABC Thermal Stability Test Protocol SAND99 - 0497"

SAE J2464 - R2009:Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing

Freedom CAR SAND 2005 - 3123:Similar to USABC SAND99 - 0497. it is a specific technical document from the Freedom CAR program. It could be called "Freedom CAR Thermal Stability Test Document SAND 2005 - 3123"

UL 1973:Batteries for Use In Stationary and Vehicle Auxiliary Power Applications

GB 38031 - 2020:Safety Requirements for Power Batteries of Electric Vehicles

Features

Precision: The self - heating detection sensitivity is far better than the standard detection threshold of 0.02°C/min. It has high thermal insulation performance and a small temperature difference between the wall and the sample.

Efficiency: With an innovative heating wire assisted heating solution, the experimental efficiency can be increased by up to 5 times.

Safety: It is equipped with safety protection measures such as burst discs, pressure relief valves, and explosion - proof boxes. The professional alarm system design comprehensively ensures the safety of personnel and equipment.

Innovation: It has the innovative function of adiabatic thermal runaway - gas production combined analysis, enabling a comprehensive acquisition of the characteristic parameters of battery thermal runaway.

Parameters

Description	Details
Adiabatic chamber effective size	Diameter: 800mm, Depth: 520mm
Self-exothermic detection sensitivity	Better than 0.02℃/min
Constant temperature wall sample temperature difference	≤ 1℃
Temperature control range	RT ~ 300℃, with low temperature module up to -25℃
Working pressure range	0 ~ 2MPa
Temperature tracking rate	0.02 ~ 15℃/min
Needle maximum stroke	Stroke can be set up by software
Charge and discharge electrode column overcurrent capacity	-1000A ~ 1000A

Accessoriess

Temperature control and insulation components

Safety and protection components

Gas processing components, etc.

Test Procedures

Sample Preparation: Preparation work includes battery surface treatment, SOC adjustment, and information recording.

Temperature Difference Baseline Calibration: During sample installation, the sample thermocouple is attached to the center of the sample's large surface, ensuring its relative position is consistent with the aluminum block in the furnace chamber.

Experimental Parameter Settings: The recommended experimental temperature range covers 50℃~200℃ to ensure that the Tonset detection value falls within this range and to avoid false detection.

Experiment Execution: During the test, the sample heating wire heats the sample according to the set heating program. The sample temperature sensor detects the sample temperature, and other sensors in the test chamber detect the ambient temperature inside the chamber.

Data Recording: The sample is heated using a direct contact method with thermocouples. Multiple temperature sensors are placed in various locations, including sensors directly attached to the sample, as well as sensors on the top, bottom, and side walls of the test chamber, and a pressure sensor, to monitor the entire test in real time.

Results Analysis: The changes in sample temperature, pressure, temperature rise rate, and pressure rise rate over time are obtained. Data analysis is performed to obtain multiple sets of thermal characteristic parameters, including initial decomposition temperature, exothermic rate, reaction heat, activation energy, and pressure rise rate.

Другие товары поставщика

	Bone Screw Mechanical Performance Test Equipment ISO/ASTM	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 1504. ASTM F543: standard specifies a test method for measur...
	ISO 6722 Automotive Wire Flex Fatigue Test Equipment Supplier Factory Direct	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Simulates real-world automotive wire bending for durability ass...
	Motorized Notching Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Motorized Notching Machine is designed to prepare standardized notched specimens for im...
	Dry and Wet Retroreflectometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry...
	Aluminum tube coating continuity inspection device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The design and manufacture of the continuity tester for the inner coating of alu...

Все товары поставщика

Похожие товары

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Продавец: Коллирон электроникс лимитед	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Продавец: Коллирон электроникс лимитед	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Продавец: Коллирон электроникс лимитед	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Продавец: Коллирон электроникс лимитед	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Продавец: Коллирон электроникс лимитед	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...