Femoral Condyles Components Fatigue Performance Tester
Standard
ASTM WK51649: Specifies fatigue testing protocols for metallic femoral components in total knee arthroplasty, including F-N curve generation and 10⁷-cycle endurance verification.
ISO 14879-1: Additional compliance for fatigue testing of total knee joint prostheses.
Adaptive Protocols: Customizable for emerging standards in additive-manufactured and coated implant evaluation.
Product Advantages
Ultra-Precision Loading: Electromagnetic actuator delivers ±0.05% force accuracy with 0.001N resolution.
10 Million Cycle Endurance: Proven capability to complete ASTM WK51649’s 10⁷-cycle fatigue test without calibration drift.
Dynamic Load Control: Advanced closed-loop system maintains specified stress ratios during sinusoidal/random loading.
Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.
Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.
Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.
Product Features
Electromagnetic Actuator: 5.000 N peak force capacity with programmable load ratios (R=0.1–10).
Triaxial Loading System: Simultaneous axial/torsional/shear loading (30 Nm max torque).
Dynamic Load Control: 0.1–30 Hz frequency range with programmable waveforms (sine, square, random, custom).
Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).
Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±5.000 N (10.000 N peak optional) |
| Frequency Range | 0.1–30 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Axial Displacement | ±20 mm (0.1 μm resolution) |
| Torque Capacity | ±30 Nm (0.01 Nm resolution) |
| Temperature Range | -20°C to +50°C (environmental chamber) |
| Humidity Control | 10–95% RH (non-condensing) |
| Data Sampling Rate | 100 kHz (synchronized across 16 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 2.500W |
| Dimensions (W×D×H) | 1.600 × 1.100 × 2.100 mm |
| Weight | 850 kg (including environmental chamber) |
| Noise Level | <68 dB (A-weighted) |
Accessories
Femoral Condyle Test Fixture Kit:
Self-centering collet system (28–40 mm femoral component compatibility)
Laser-aligned loading anvils with diamond-like carbon (DLC) coating
Thermal-Mechanical Chamber:
20L capacity with rapid cooling/heating (15°C/min)
316L stainless steel interior with HEPA filtration
TestMaster Ultimate Software:
Automated F-N curve generation and fatigue limit calculation
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via dedicated iOS/Android app
Operator Kit:
Calibrated torque wrench set (0.5–50 Nm)
Specimen alignment gauges (ASTM WK51649 compliant)
Calibration Bundle:
NIST-traceable force calibration weights
Temperature/humidity verification probe
Safety Kit:
Laser safety curtains
Acoustic enclosure with 30 dB noise reduction
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Incline Impact Tester | The Incline Impact Tester is designed to evaluate the impact resistance of products, packaging, and transport systems under controlled oblique load... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, ... |
 |
Metal ring friction and wear testing device | Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
 |
UL94 Horizontal/ Vertical Flame Test Machine | This machine is designed according to plastic Materials flammability test; It is used to test flammability, burning rate, flame spread, burning f... |
 |
Wet Wick for Humidity Test Chamber | Hanging method The first step is to cut a suitable wet bulb gauze for thehumidity test chamber. The second step is to hang the wet bulb gauze on ... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
