.

Microbial Barrier Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the contact wound materials claimed to have bacteria-inhibiting performance. The bacteria-inhibiting test device can simultaneously meet the four test methods of wet bacteria-inhibiting, dry bacteria-inhibiting, semi-wet (dry outside and wet inside) bacteria-inhibiting, and semi-wet (wet outside and dry inside) bacteria-inhibiting.

Standard:

EN 15194:Cycles - Electrically power assisted cycles - EPAC Bicycles

ISO 4210:Cycles - Safety requirements for bicycles

UL 2849:Standard for Electric Bicycles and Electric Scoooters

ECE R50:Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for vehicles of category L

Principle:

The sample was placed between two collets of a hemispherical glassware, a certain amount of standard bacterial solution was added to one side of the ware, and liquid medium was added to the other side, and the turbidity in the liquid medium was checked after a certain period of time

Or scrape the liquid to check for bacterial growth.

Advantages:

Ensures compliance with critical safety and performance standards for e-bike lighting.

Provides accurate and repeatable measurements of photometric and electrical parameters.

Allows for comprehensive evaluation of light distribution and beam patterns.

Facilitates durability testing under simulated environmental and mechanical stresses.

Supports efficient research and development of innovative and reliable lighting solutions.

Contributes to enhanced rider safety and visibility in various conditions.

Helps in meeting regulatory requirements for market access and product certification.

Features:

Goniophotometer: A precise instrument for measuring light intensity distribution in 3D space, essential for analyzing beam patterns and obtaining luminous intensity data.

Integrating Sphere: Used for measuring total luminous flux (lumens) and other integral photometric quantities, often with a spectroradiometer for color properties.

Photometers/Lux Meters: High-accuracy instruments for measuring illuminance at specific points or areas.

Programmable DC Power Supply: To provide stable and controllable power to the e-bike lighting device, simulating various battery conditions.

Electrical Measurement Unit: For measuring voltage, current, power consumption, and electrical efficiency of the lighting device.

Environmental Test Chambers: Chambers for simulating conditions such as extreme temperature, humidity, thermal shock, and salt spray.

Dust and Water Ingress Test Chambers: To evaluate the lighting device's IP (Ingress Protection) rating (e.g., IP6X, IPX7).

Vibration and Shock Test Systems: To assess the mechanical robustness and durability of the lighting device under typical e-bike operating conditions.

Control Software and Data Acquisition: Comprehensive software for automating test procedures, collecting data, analyzing results, and generating reports.

Fixture and Mounting: Adjustable fixtures to securely mount various types and sizes of e-bike lighting devices for testing.

Parameters

DescriptionDetails
Vibration type Pneumatic ball vibrator
Vibration frequency 20.800 times/min
Vibration force 650N
Worktable dimensions 40cm × 40cm × 10mm
Worktable material Marble slab
Experimental container Stainless steel experimental container
Number of working positions 6
Cabinet negative pressure range -50 Pa to -200 Pa
High-efficiency filter filtration efficiency Better than 99.99%
Negative pressure cabinet ventilation flow rate ≥5m³/min
Data storage capacity 100.000 sets
Operating voltage 220V 50HZ

Accessoriess

Two hemispherical glass devices,

two glass plugs,

two gooseneck glass tubes.

Test Procedures

Materials Preparation: Select suitable breathable packaging materials for testing.

Generation of Microbial Aerosols: Use an aerosol generator to produce microbial aerosols of a specific concentration.

Material Testing: Place the breathable packaging material to be tested into the testing apparatus, allowing the microbial aerosol to pass through the material.

Sampling: Use a six-channel filtration sampling device to simultaneously collect microbial samples from both the sample group and the control group.

Results Analysis: Evaluate the microbial barrier performance of the breathable packaging material by comparing the sampling results of the two groups.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

ISO certified Wear Track Profilometer tester
ISO certified Wear Track Profilometer tester Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The probe type material surface abrasion measuring instrument is...
Helmets Vertical SpacingInfrared - positioning Tester
Helmets Vertical SpacingInfrared - positioning Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet vertical spacing infrared positioning tester is a specialized instrument used to...
ISO head protection helmet surface projection evaluation system for laboratories
ISO head protection helmet surface projection evaluation system for laboratories Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)GB811:Helmets for motorcycle and electric bicycle users (2)ECE...
Laboratory AC/DC Wire Temperature and Voltage Drop Tester Manufacturer
Laboratory AC/DC Wire Temperature and Voltage Drop Tester Manufacturer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Dual AC/DC testing capability with precise current and voltage ...
Falling ball rebound instrument
Falling ball rebound instrument Whats/App: +86 156 1874 6768 Web: standard-groups.com The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008...
Все товары поставщика

Похожие товары

pH-2398  pH/EC/ORP/Temperature  multi-parameter Water Quality Tester
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester Продавец: Коллирон электроникс лимитед Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
ORP-2026S  Waterproof Soil ORP and Temperature Meter
ORP-2026S Waterproof Soil ORP and Temperature Meter Продавец: Коллирон электроникс лимитед 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
TDS-2616  Waterproof EC/TDS/Temperature Meter
TDS-2616 Waterproof EC/TDS/Temperature Meter Продавец: Коллирон электроникс лимитед Range EC ~19.9mS TDS Temp 0~50℃ R...
EC-98330 CF ECOstick - Nutrient Tester
EC-98330 CF ECOstick - Nutrient Tester Продавец: Коллирон электроникс лимитед Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
PH-808 Waterproof Soil PH Meter
PH-808 Waterproof Soil PH Meter Продавец: Коллирон электроникс лимитед Model PH-808 Range PH ~14.00PH Temp 0~50℃ ...