Flip Phone Durability Tester

The Flip Phone Durability Tester is a specialized testing machine designed to evaluate the fatigue life and mechanical reliability of clamshell and foldable mobile s. By simulating repeated opening and closing actions under controlled conditions, it provides precise and repeatable measurements of hinge durability, wear, and failure points. Compact and adaptable, this tester is suitable for integration into environmental chambers or limited lab spaces.

Application

(1) Fatigue life testing of clamshell and foldable smarts

(2) Mechanical reliability assessment of mobile hinges and flip mechanisms

(3) Quality control and production verification for mobile manufacturers

(4) Research and development of new hinge designs and materials

(5) Testing of models under accelerated use conditions

(6) Integration into environmental test chambers for combined temperature/humidity and mechanical testing

Standards

(1) GB/T 2423.2-2008 — Environmental testing for electrical and electronic products: Low-temperature test

(2) IEC 60068-2-1 — Environmental testing: Cold

(3) IEC 60068-2-2 — Environmental testing: Dry heat

(4) JEDEC JESD22-B111A — Mechanical shock and hinge testing for electronic devices

(5) ASTM F1977 — Standard test method for fatigue of electronic hinges

(6) ISO 9001 — Quality management requirements for testing processes

Features

(1) Compact and unique design suitable for limited laboratory spaces or environmental chambers

(2) Multi-station configuration (4 stations) for simultaneous testing of multiple devices

(3) High-precision stepper motor and Siemens PLC control for stable and repeatable operation

(4) Automatic swing arm angle adjustment from 0° to 180°

(5) Sensor-based direct detection of flip counts for accurate fatigue measurement

(6) Low-noise and maintenance-free operation

(7) User-friendly touch screen interface for easy parameter setup and monitoring

(8) Anti-static fixtures to protect devices during testing

Parameters

Item	Description
Number of stations	4
Operation mode	Touch screen
Control element	Siemens PLC
Action execution	Stepper motor
Swing arm angle range	0–180° (automatic adjustment)
Clamshell beat frequency	50–30 times/min (automatic adjustment)
Counter	6-digit built-in
Fixture type	Anti-static fixture
Power supply	AC 220V/50Hz

Accessories

(1) Anti-static device fixtures

(2) Sample mounting brackets for various sizes

(3) Calibration tools for stepper motor and PLC system

(4) Optional environmental chamber interface

Test Procedures

(1) Secure the mobile in the anti-static fixture on the designated station

(2) Set the desired swing arm angle and flip frequency via the touch screen

(3) Start the test using the PLC control interface

(4) Monitor the flip count via the built-in counter

(5) Observe the device for any mechanical failure or degradation

(6) Automatically stop the test once the preset flip count is reached or device failure occurs

(7) Record results and, if necessary, repeat for additional devices or test parameters

Maintenance Information

(1) Regularly clean fixtures and swing arms to prevent dust accumulation

(2) Inspect and calibrate the stepper motor and PLC control system periodically

(3) Verify sensor accuracy and counter functionality before testing

(4) Lubricate moving mechanical parts as recommended by the manufacturer

(5) Store the tester in a dry, stable environment to maintain electrical and mechanical reliability

Другие товары поставщика

	Cold Environment Chamber	Features and Benefits 1.Ultra-wide high and low temperature range (-120°C to +150°C), meeting the testing requirements of multiple scenari...
	Dry microbial penetration resistance tester	DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate...
	Leather thickness tester	Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f...
	Flame Propagation Test for a Single Insulated Cable IEC / EN 60332-1-2，EN 50086	Description: This testermeetthe standards IEC 60332-1-1:2004 in the provisions of technical indicators and requirements. Single cable combustion ...
	Contact Lens Oxygen Permeability Analyzer	Product Introduction: Contact lens oxygen permeability measuring instrument (polarography) is designed for soft and hard contact lenses (contact l...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...