Rubber hose outer coating wear testing machine

The Rubber Hose Outer Coating Wear Testing Machine is a precision laboratory and production testing instrument designed to evaluate the abrasion resistance of rubber and thermoplastic hose outer coatings. It is suitable for hoses reinforced with fabric or steel wire and featuring smooth, flat surfaces. By applying a controlled reciprocating motion with a defined vertical load, this machine simulates real-world wear conditions experienced by hydraulic, automotive, and industrial hoses, providing accurate and reproducible data for quality control, R&D, and material performance evaluation.

Applications

(1) Hydraulic hoses: Rubber hoses with smooth, flat outer coatings reinforced with fabric or steel wire.

(2) Industrial hoses: Air, water, and chemical hoses with similar outer coating structures.

(3) Automotive hoses: Brake lines, fuel lines, and coolant hoses.

(4) Testing laboratories: Quality control and research for abrasion resistance of hose coatings.

(5) Material evaluation: Suitable for rubber, thermoplastic, or composite hose cladding.

Standards

(1) GB/T 12721-2007 — Determination of abrasion resistance of rubber hose outer coating

(2) ISO 6945:1991 — Rubber hoses — Determination of abrasion resistance of cladding

(3) KS M ISO 6945-2013 — Determination of abrasion resistance of the outer coating of rubber hoses

(4) EN ISO 6945-1996 — Determination of abrasion resistance of rubber hose outer coatings

(5) DS/ISO 6945-1984 — Determination of wear resistance of rubber hose cladding

Features

(1) High reproducibility: Provides consistent and accurate abrasion testing of rubber hose outer coatings.

(2) Versatile mandrel sizes: Supports a wide range of shaft diameters to accommodate different hose types.

(3) Adjustable load: Vertical static pressure can be set according to the product standard or customized.

(4) Simulates real-world wear: Reciprocating motion reproduces the friction and wear that hoses experience in operation.

(5) Easy operation and setup: Simple installation of hose samples and abrasive tool ensures quick test preparation.

Technical Parameters

Item	Specification
Reciprocating frequency	1.25 Hz (45 RPM)
Cycle stroke	200 mm
Loading static pressure	50 N ± 0.5 N (customizable)
Mandrel length	150 mm
Shaft diameters	5, 8, 10, 13, 16, 19, 22, 25, 32, 38, 45, 51 mm (3 selectable, or customized)
Power supply	AC 220V, 50/60 Hz (typical)

Accessories

(1) Main testing machine ×1

(2) Standard mandrels (3 selectable sizes) ×1 set

(3) Abrasive tool ×1

(4) Weights for loading pressure ×1 set

(5) Power cable ×1

(6) Instruction manual ×1

Test Procedure

(1) Install the assembled hose sample and mandrel on the test device, ensuring no axial movement or rotation.

(2) Position the abrasive tool in contact with the sample and apply the vertical static pressure F specified by the standard (or 50 N ± 0.5 N if unspecified).

(3) Start the machine and allow it to run until the required number of cycles is completed.

(4) Remove the sample assembly, clean off any debris or particles from the outer coating, and weigh the sample (with or without core shaft) to compare with initial weight.

Maintenance Information

(1) Regularly clean the abrasive tool and test mandrels to remove rubber debris.

(2) Inspect the reciprocating mechanism and bearings periodically for smooth operation.

(3) Check calibration of applied load weights to ensure consistent static pressure.

(4) Lubricate moving parts according to the manufacturer’s recommendations.

(5) Store the machine in a clean, dry environment when not in use.

Другие товары поставщика

	Safety Helmet High Temperature Pre-Treatment Chamber	The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril...
	Humidity Chamber	Features and Benefits 1. The humidity test chamber can realize long-term 85°C 85%RH test. The automatic water inlet and water circulation syst...
	Plastic Biodegradation Testing System，ISO 16929 Biodegradable Plastic Testing Instruments	The Plastic Biodegradation Testing System is a laboratory system used to evaluate the ultimate aerobic biodegradation performance and disintegratio...
	Air Permeability Tester STD- F8	The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples, from those...
	Strength Tester for Lead - end of Photovoltaic Modules	Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...