Fiber Blend Ratio Tester

The Fiber Blend Ratio Tester is designed to measure the electrical resistance of a compacted fiber sample and convert it into the specific resistance of the fiber according to its filling density. It provides accurate, repeatable measurements for fiber quality evaluation, research, and production control, suitable for textile, nonwoven, and fiber material laboratories.

Application

(1) Testing specific resistance of synthetic staple fibers such as polyester, rayon, acrylic, and nylon in textile manufacturing.

(2) Quality control and R&D of fiber blends in nonwoven fabrics, yarns, and felts.

(3) Evaluation of cotton, wool, and blended natural fibers for electrical properties.

(4) Measurement of resistance in technical textiles used in automotive, aerospace, and medical applications.

(5) Assessment of fiber-based materials for smart textiles, conductive fibers, and anti-static fabrics.

(6) Comparative analysis of recycled fibers or fiber mixtures for product development.

Standards

(1) GB/T 14342-1993: Synthetic short fiber specific resistance test method.

(2) GB/T 14342-2015: Updated national standard for specific resistance measurement of man-made staple fibers.

(3) ISO 2060: Determination of the fineness of fibers by electrical resistivity (analogous methodology).

(4) ASTM D4496: Standard test method for electrical resistance of textile fibers.

(5) EN 1149-1: Protective clothing—Electrostatic properties—Test method for surface resistivity of fibers and textiles.

(6) JIS L 1020: Test method for electrical resistance of textile fibers.

Features

(1) Standard Compliance: Fully adheres to GB/T 14342 and other international standards.

(2) Wide Measurement Range: Measures fiber specific resistance from 10^6Ω to 10^13Ω.

(3) Accurate Voltage Application: Provides stable 50V and 100V test voltages with less than 5% deviation.

(4) Stable Operation: Reliable in controlled temperature (20℃±2℃) and humidity (65%±10%RH).

(5) Low Zero Drift: Less than 4% over 1–8 hours under stable voltage with no signal input.

(6) High Basic Accuracy: Basic error ≤±20% relative to standard resistance measurements.

(7) Compact Design: Laboratory-friendly size (450×265×133 mm).

(8) Indirect Measurement: Converts measured bulk resistance of compacted fiber into specific resistance.

(9) Resistance Measurement System and Fiber Compaction Chamber: Ensures precise measurement.

Parameters

Parameter	Specification
Fiber specific resistance range	10^6Ω – 10^13Ω
Test sample weight	15 g
Measurement voltage	50V, 100V, deviation <5%
Working temperature	20℃ ±2℃
Working humidity	65% ±10% RH
Zero drift	<4% over 1–8 hours
Basic measurement error	≤±20%
Power supply	AC 220V
Overall size	450 × 265 × 133 mm (L×W×H)

Accessories

(1) Main unit

(2) Fiber compaction chamber

(3) Sample holder

(4) Power cable

(5) User manual

Test Procedures

(1) Prepare the tester and connect the power supply.

(2) Weigh 15 g of fiber sample and place it in the compaction chamber.

(3) Set the desired measurement voltage (50V or 100V) and ensure the environment meets the temperature and humidity requirements.

(4) Start the test; the instrument compacts the fiber and measures its resistance.

(5) The tester automatically calculates the specific resistance of the fiber.

(6) Record the displayed specific resistance values for analysis.

(7) Remove the sample and clean the compaction chamber after testing.

Maintenance Information

(1) Keep the compaction chamber clean to avoid residue affecting measurements.

(2) Check electrical connections regularly and ensure stable voltage supply.

(3) Calibrate periodically using standard resistors.

(4) Avoid exposure to moisture, dust, or corrosive substances.

(5) Store the instrument in a dry, controlled laboratory environment.

(6) Monitor zero drift periodically to maintain measurement reliability.

Другие товары поставщика

	Vertical Flammability Chamber	VTEC Vertical Flammability Chamber Testing Standards: ASTM D6413-99. DOC-FF 3/71. CALIF TB-117. GB/T 5455. CPAI-84 Applications Vertical Flammab...
	Helmet Webbing Micro - displacement Abrasion Tester	Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif...
	Thrust Washer Friction Testing Machine	The thrust washer friction testing machine is mainly used to simulate the frictional contact of materials under specific working conditions and to ...
	Automotive Wires Ozone Aging Chamber	Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive app...
	Large diameter blasting test machine	The large-diameter blasting test machine can perform continuous (linear) pressure testing of pipes according to ASTM D 1599 standard. The pressuriz...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...