Fiber Crimp Elasticity Tester

The Fiber Crimp Elasticity Tester is a specialized instrument designed to measure the crimp degree, crimp elasticity, and crimp recovery rate of fibers with linear densities from 1 to 22 dtex. It is widely used in fiber research, production, and quality inspection departments to evaluate both natural and chemical fibers, providing accurate and repeatable measurements for fiber performance analysis and process optimization.

Application

(1) Testing crimp degree and crimp recovery rate of synthetic fibers such as polyester, nylon, acrylic, and rayon.

(2) Evaluating natural fibers including cotton, wool, and blended fibers for crimp elasticity.

(3) Fiber research and development in textile laboratories and nonwoven material production.

(4) Quality control in fiber spinning, carding, and finishing processes.

(5) Comparative studies of crimp performance for recycled or blended fibers.

(6) Assessment of fibers used in technical textiles for automotive, medical, and smart textile applications.

(7) Education and training purposes in fiber science and textile engineering programs.

Standards

(1) GB/T 14338-2008: Test method for crimp and crimp elasticity of staple fibers.

(2) GB/T 14338-2022: Updated national standard for crimp performance of man-made staple fibers.

(3) ISO 2060: Determination of fiber fineness by electrical or physical methods (applied analogously).

(4) ASTM D885: Standard test methods for crimp characteristics of textile fibers.

(5) EN 1269-1: Test methods for staple fibers—crimp characterization and recovery rate measurement.

(6) JIS L 1013: Methods for evaluating crimp and elasticity of textile fibers.

Features

(1) Standard Compliance: Fully adheres to national and international standards for fiber crimp testing.

(2) Broad Applicability: Supports fibers with linear densities from 1 to 22 dtex, including natural and chemical fibers.

(3) Versatile Tension Loading: Multiple tension ranges (0–5 mN, 0–10 mN, 0–25 mN) with fine minimum divisions for precision control.

(4) High Measurement Resolution: Displacement resolution of 0.01 mm ensures accurate measurement of fiber elongation.

(5) Automated Testing: Automatic timing with selectable durations of 30s, 60s, and 120s for consistent results.

(6) Clear Observation: Equipped with LED lighting to facilitate monitoring of the fiber sample during testing.

(7) Comprehensive Analysis: Measures crimp degree, crimp elasticity, and crimp recovery rate.

(8) Supports Key Departments: Essential for fiber research, production, and inspection laboratories.

Parameters

Parameter	Specification
Tension loader range	0–5.00 mN (min division 0.01 mN), 0–10.00 mN (min division 0.02 mN), 0–25.00 mN (min division 0.05 mN)
Initial length	20 mm
Lower clamp stroke	≤30 mm
Displacement resolution	0.01 mm
Timing	Automatic, selectable: 30s, 60s, 120s
Lighting	LED lights
Crimp count length	25 mm
Power supply	AC 220V, 50 Hz

Accessories

(1) Main unit

(2) Fiber clamps and tension loaders

(3) Sample holder

(4) LED observation lamp

(5) Power cable

(6) User manual

Test Procedures

(1) Prepare the instrument and connect the power supply.

(2) Mount the fiber sample in the upper and lower clamps according to the required initial length.

(3) Select the appropriate tension loader range and test timing.

(4) Start the test; the instrument applies tension and records displacement.

(5) Observe the fiber under LED lighting to confirm proper measurement.

(6) Read and record the crimp degree, crimp elasticity, and crimp recovery rate.

(7) Remove the sample and clean the clamps after testing.

Maintenance Information

(1) Keep the clamps and tension loading components clean to prevent measurement errors.

(2) Check the LED lighting and replace bulbs as necessary.

(3) Verify timing and tension accuracy periodically using calibration fibers.

(4) Avoid exposure to moisture, dust, or corrosive substances.

(5) Store the instrument in a stable laboratory environment with controlled temperature and humidity.

(6) Inspect mechanical components regularly for wear and lubricate moving parts as recommended.

Другие товары поставщика

	Prefilled Syringe Plunger Force Tester	The Prefilled Syringe Plunger Force Tester is widely used in the medical device industry, mainly for testing the push - force performance of prefil...
	Coating abrasion resistance tester	Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met...
	Sauce Packet Pressure Testing Instrument	The pressure resistance tester for sauce packets is a device specifically designed to test the pressure - resistance performance of soft packaging ...
	Friction and wear testing machine	Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to ass...
	Face Mask Tensile Tester	The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, and related mechanical properties of various textiles an...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...