Bag lifting fatigue testing machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven bag and other bags bearing a certain weight. After many fatigue tests, the strength of the bag can be determined. The bag lifting fatigue testing machine adopts the automatic test mode, placing the sample on the fixture, setting the lifting times and load weight, and automatically completing the experiment process and printing the results. This fatigue testing machine is widely used in quality inspection institutions and handbag manufacturers.

Applications

1. Used for fatigue testing of paper and plastic shopping bags.

2. Used for testing the fatigue strength of disposable non-woven shopping bags and related products.

3. Used for fatigue testing of plastic products such as plastic garbage bags and eco-friendly bags.

4. Used for fatigue testing of plastic bags such as supermarket shopping bags and vest-style bags.

Standards

ISO 1167:Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure

ASTM D 1598-23:Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

ASTM D 1599-18 (2024):Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

Features

Microcomputer control, large LCD display

Four-column structure, the fatigue test process is stable and reliable

PVC operating panel, humanized design

The number of bag lifting fatigue test can be set freely

Selection of excellent components, low noise, high life

The bag lifting fatigue machine comes with a printer, which can quickly print the experimental results

Bag weight can be set, the experimental results are clear

Technical Parameters

Parameter	Specification
Amplitude	30±2mm
Vibration frequency	——3HZ (130 times per minute)
Test space height	500/1000mm
Load	20Kg
Counting range	99.999 times in a single cycle
Dimensions	570mm510mm1520mm (length, width and height)
Weight	60KG
Power supply	220V 50Hz

Accessoriess

Bag fatigue testing machine (main unit), miniature printer

Test Procedures

1. Basic Operating Procedure

1.1 Instrument Installation and Debugging

Place the testing machine on a stable surface and adjust the leveling screws to ensure the equipment is level. When connecting the power cord, confirm that the voltage matches (usually 220V) and check that the aviation connector has good contact.

After starting the equipment, perform a no-load test: set the vibration frequency to 2Hz and observe whether the amplitude is stable within the range of 30mm ± 2mm. If the deviation exceeds ±2mm, adjust the motor parameters or check the transmission components.

1.2 Sample Preparation and Loading

According to standard requirements, select representative samples (such as plastic bags, kraft paper bags) and fill them with a granular mixture equivalent to twice the nominal weight of the contents (such as sand, rice grains). The loading amount should be controlled at 3/4 of the effective volume of the bag to avoid sample deformation due to overfilling.

When suspending the sample from the testing machine's fixture, ensure that the lifting straps are evenly stressed. A spirit level can be used to assist in adjustment to keep the sample vertical during vibration.

1.3 Parameter Setting and Start-up

Enter the equipment operation interface and set the vibration frequency (2Hz to 3Hz), number of cycles (e.g., 1800 cycles), or time (e.g., 10 minutes). Some equipment supports multi-mode switching; you can choose "cycle priority" or "time priority" mode as needed.

Press the "Reset" button and then start the test. The equipment will automatically record the number of vibrations. During the test, the operator should observe the sample status. If the lifting strap breaks or the bag body ruptures, immediately press the "Emergency Stop" button.

2. Key Parameter Settings

2.1 Amplitude and Frequency Control

According to the GB/T 38082-2019 standard, the amplitude must be strictly controlled at 30mm ± 2mm, and the frequency should be 2Hz to 3Hz (130 cycles per minute). A study shows that a frequency deviation of 0.5Hz can lead to an error of more than 10% in the 3600-cycle test time, directly affecting fatigue life assessment. Some equipment supports dynamic adjustment functions, allowing for fine-tuning of parameters during the testing process based on the deformation of the sample. For example, when testing biodegradable plastic bags, if the elongation of the handle exceeds 5%, the frequency can be reduced to 1.8 Hz to prevent premature breakage.

2.2 Load and Cycle Settings

The load setting should be based on the nominal load capacity of the sample. For example, when testing shopping bags with a nominal load capacity of 5 kg, 10 kg of granular mixture should be loaded. The number of cycles should be set according to standard requirements: GB/T 38082 specifies 1800 cycles as the passing threshold, while internal company standards may increase this to 3600 cycles.

Другие товары поставщика

	Water Vapour Permeability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Water Vapour Permeability Tester is a constant temperature and humidity instrument desi...
	Industrial Multifunction Tribology Testing Equipment Supplier China	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Universal Multifunction Tribology Test Machine (UMT Series) is a versatil...
	Liquid Spontaneous ignition point tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temp...
	Battery Powder Compaction Density Evaluation System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Measurement of tapped density and compaction characteristics of lithium-io...
	Flip Phone Durability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards: GB/T2423.2-2008IEC60068-2-1IEC60068-2-2JEDECJESD22-B111AASTMF1977 Product Adva...

Все товары поставщика

Похожие товары

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Продавец: Коллирон электроникс лимитед	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Продавец: Коллирон электроникс лимитед	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Продавец: Коллирон электроникс лимитед	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Продавец: Коллирон электроникс лимитед	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Продавец: Коллирон электроникс лимитед	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...