Catheter Friction Tester
The Catheter Friction Tester is a precision instrument used to measure the surface friction properties of various tubular materials. Employing advanced force sensing technology and a precise motion control system, it accurately determines the static and dynamic friction coefficients of pipes under different conditions.
Applications
The catheter friction performance tester is a professional instrument used to detect the surface slipperiness of medical catheters, and it has a wide range of applications, mainly including the following aspects: Medical Device R & D: During the R & D of new - type catheter - based medical devices, the tester can be used to evaluate the friction performance of catheters made of different materials and with different design schemes, providing a basis for product quality control. Meanwhile, by selecting catheters with appropriate frictional force through testing, product design can be optimized and product performance can be improved. Clinical Assessment: In clinical practice, the tester can provide parameter data for doctors, helping them select suitable catheters, thus improving the safety and effectiveness of treatment. Academic Research: Academic institutions and research units can use the tester to conduct relevant basic research, and deeply explore the influence mechanism of friction performance on the effects of interventional treatment.
Standards
YY/T 1536-2017:Catheters other than intravascular catheters — Standard test model for evaluating the surface sliding performance
TCAMDI 021-2019:Medical devices — Surface lubricious coatings — Test method for wear resistance
Features
1. High-precision measurement: Equipped with an imported force sensor.
2. Multifunctional testing: Supports multiple testing modes including dry friction and lubricated friction.
3. Intelligent control: Utilizes a PLC + touchscreen control system; test parameters are programmable.
4. Safe and reliable: Features multiple safety devices including overload protection and emergency stop.
5. Accurate data: Automatically collects and processes test data, generating professional test reports.
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Testing Range | It can test medical catheters of different specifications and models, including urinary catheters, guidewires, balloon catheters, etc. |
| Friction Measurement Range | Generally, it has a wide measurement range to adapt to catheters made of different materials and with different surface - treatment methods. |
| Friction Measurement Accuracy | High - precision sensors and data acquisition systems ensure the accuracy and reliability of measurement results. |
| Environmental Simulation Function | It can simulate different blood - flow conditions, temperatures, and humidities to evaluate the performance of catheters under physiological conditions. |
| Data Processing System | With a built - in data processing system, it can analyze the changes in frictional force and generate detailed test reports. |
Accessoriess
Standard Configuration: Main unit (embedded software), monitor, keyboard, mouse, guide wire clamps (including silicone rubber clamps), circulating water bath heating device, printer (inkjet).
Optional: Standard pressure roller, test plate, sampling knife, printer (laser), air compressor.
GMP Computer System Requirements, DataShield.
Note: The air supply interface of this machine is a Ф4mm polyurethane pipe; the air supply is provided by the user.
Test Procedures
Set test parameters (speed, number of friction cycles) → Add water and set temperature control → Install catheter clamps and adjust the specified spacing and clamping force → Clamp the catheter → Test → Report the average friction force of the wetted section of the catheter body, unit: N
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Catheter Sliding Performance Tester | The Catheter Sliding Performance Tester is professionally used for measuring the surface friction and sliding performance of interventional cathete... |
 |
Dry and Wet Retroreflectometer | The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testing Machine, is designed to evaluate the wear resistance o... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu... |
 |
Glove Cut Resistance Test meter | Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
 |
Intramedullary Nails Static Four-point Bending Tester | Standard YY/T 0591 (China): Standard for static four-point bending tests of lockable intramedullary nails. ASTM F1264 (International): Specificat... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
