Catheter bending resistance tester

The Catheter Bending Resistance Tester is a specialized instrument designed to evaluate the bending performance and flow characteristics of catheters. It measures the reduction in flow rate under simulated bending conditions, providing critical data to ensure catheter reliability and safety in clinical applications. The system features real-time force monitoring, automatic result evaluation, and integrated printing for efficient test documentation.

Application

The tester is suitable for a wide range of medical devices, including:

(1) Urinary catheters – testing flow performance under bending to simulate patient conditions.

(2) Drainage catheters – assessing irrigation and drainage cavities.

(3) Infusion catheters – verifying consistent fluid delivery despite bends or kinks.

(4) Preclinical research – evaluating new catheter designs for flexibility and functionality.

(5) Quality control in medical device manufacturing – ensuring compliance with product specifications.

Standards

The instrument is designed to comply with the following standards:

(1) YY/T 0325-2016: Urinary Catheters – Flow and Bending Performance (China)

(2) GB/T 15812.1-2005: Disposable Catheters – General Requirements (China)

Optional references for broader compliance:

(3) ISO 10555-3: Sterile single-use intravascular catheters – Part 3: Single-use catheters for hemodialysis

(4) ASTM F2392: Standard Test Method for Catheter Performance

Features

(1) Programmable controller with touch screen interface for easy parameter setup.

(2) Real-time monitoring of force and flow data.

(3) Automatic result evaluation with buzzer alarm for unqualified tests.

(4) Integrated printer for immediate documentation of test results.

(5) Adjustable fixtures to accommodate various catheter sizes and types.

(6) Automatic circulation of water pump to simulate physiological conditions.

(7) Dual language interface (Chinese/English) for global usability.

Parameters

Parameter	Specification
Static level height	1000 ± 5 mm, automatic water pump circulation (adjustable)
Time controller	0 – 60 min, error ±1 s
Test fixture	Suitable for various catheters
Flow calculation method	Measuring cylinder method
Flow rate	> 500 mL/min
Overall size (L × W × H)	400 × 290 × 240 mm
Control system	Programmable PLC with touch screen
Printing	Onboard printer for real-time test results

Accessories

(1) Main test unit – 1 set

(2) Fixtures for various catheter types – 1 set

(3) Onboard printer paper – 1 roll

(4) Operation manual – 1 set

(5) USB storage device (optional)

Test Procedures

(1) Install the catheter into the test fixture, ensuring proper alignment.

(2) Adjust the static water level using the automatic circulation pump.

(3) Set test parameters via the touch screen: nominal capacity, flow measurement, test duration, calibration, and verification.

(4) Start the test; the system applies bending force to the catheter loop while measuring flow reduction.

(5) Monitor real-time force and flow data on the screen.

(6) The system automatically evaluates results, sounds an alarm if the catheter fails, and prints a report for record-keeping.

Maintenance Information

(1) Regularly clean the water circulation system and fixtures to prevent debris buildup.

(2) Calibrate the flow measurement system periodically to ensure accuracy.

(3) Avoid prolonged exposure to direct sunlight or excessive moisture.

(4) Inspect electrical connections and sensors for wear or damage.

(5) Follow standard electrical safety procedures during operation.

Другие товары поставщика

	Catheter Power Injection Flow and Pressure Tester	Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f...
	Suture Needle Penetration and Bending Strength Tester	The Suture Needle Penetration and Bending Strength Tester is a device used to test the penetration performance and strength of medical suture needl...
	Automatic Cleanliness Extractor	Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...
	Multiphase High - temperature and High - pressure Explosion Limit Tester	The Multiphase High-Temperature and High-Pressure Explosion Limit Tester is an instrument developed based on standards such as EN 1839, ASTM E918, ...
	Liquid Sustained Combustion Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...