Safety Helmet Impact Acceleration Tester

• 

The safety helmet impact acceleration tester is an instrument used to test the performance of safety helmets when subjected to impact. It can simulate the impact forces that safety helmets experience during events such as falling objects or collisions, thereby verifying whether they can effectively absorb energy and protect the head.

Application

This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.

Standard

GB / T 2812-2006:Test method of safety helmet

GB / T 2811-2007:Safety helmet

Feature

Standardization and Ease of Use: Complies with GB/T2812 standard, simple operation, one-button start of the test, and automated process reduces human error.

Precise Measurement and Intelligent Control: Laser sensors accurately measure the distance between the impact head and the safety helmet, supporting custom height settings with an error of ≤1%.

High Precision and Reliability: IEPE sensor + laser positioning + digital display, achieving industry-leading data accuracy.

Intelligent Operation: Automatic adjustment, real-time data acquisition, and curve analysis significantly improve test efficiency and data value.

Safety Protection Design: Enclosed test chamber + sturdy machine body ensure the safety of operators and equipment.

Application Value: Provides scientific basis for manufacturing enterprises and quality inspection institutions, helping to optimize product design, improve product quality, and ultimately protect the lives of frontline workers.

Parameters

Accessoriess

Impact Test Bench

Headform

Headform Mounting Bracket

Ball Joint

Anvil

Anvil Base

Release System

Concrete Base

Accelerometer (Acceleration Sensor)

Analysis Recorder

Test Procedures

Equipment Preparation: Check the integrity of the equipment's power lines, confirm that the grounding protection device is effective, and ensure the hydraulic system oil level is above 80% of the scale.

Environmental Parameter Calibration: The laboratory temperature must be controlled at (20±2)℃, and the humidity should be below 60%.

Sample Installation Procedure: When fixing the safety helmet to the head form, ensure that the distance between the helmet shell and the head form meets the test standards, and adjust the tightness of the chin strap.

Test Operation: Press the "Tare/Zero" button on the control panel to eliminate the initial influence of the safety helmet's own weight on the force sensor.

Data Recording: Save the test results using the "Store" button on the control panel, or connect a USB flash drive to export the data (supports Excel/PDF format).

Другие товары поставщика

	Minimum Ignition Energy (MIE) – Dust Cloud Tester	Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device through a certain pr...
	Xenon Test Chamber/weather ometer	Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal n...
	Rapid screening Calorimeter	The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal hazards. It supports multi...
	Light Fastness Test Instrument丨Light Fastness Tester	Features and Benefits 1.The lightfastness test instrumentusexenon arc lamp as a radiation source, the visible light range emitted is 380nm-750nm...
	Shirley Moisture Permeability Tester	Introduction Shirley moisture permeability tester is used to detect water vapor permeability of textiles and textile composites, especially spor...

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...