Zipper Fatigue Tester

Product Introduction:

The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without failure. A Zipper Fatigue Tester provides a standardized method to assess this characteristic, commonly referred to as reciprocation or cycling resistance.

The test involves mounting a specimen of the zipper onto the tester. The zipper tapes are typically held securely at each end, and a specified lateral or transverse tension (or a combination) may be applied to simulate the stresses encountered in a finished product. The zipper slider is then grasped by a mechanism on the tester. A motorized drive system moves the slider back and forth along the zipper chain, causing the zipper to repeatedly open and close over a defined stroke length.

The instrument is used in laboratories for:

Determining the number of cycles a zipper can withstand before functional failure.

Evaluating the durability and lifespan of various zipper types (e.g., coil, Vislon, metal) and sizes.

Quality control during zipper manufacturing to ensure consistent performance.

Assessing the effect of different materials, designs, or finishes on zipper fatigue life.

Research and development of more durable zipper components and assemblies.

Ensuring zippers meet the performance requirements for the products they will be used in (e.g., heavy-duty applications vs. light apparel).

Meet the standard:

ASTM D2060

BS 3084

JIS S3015

DIN 3416

Product Advantages:

Provides objective, quantitative data on zipper durability under repeated opening and closing cycles.

Essential for predicting the service life of zippers and ensuring product quality and reliability.

Helps ensure zippers maintain smooth operation and structural integrity over time.

Standard compliant test methods (ASTM D2060. BS 3084) are widely used for zipper performance evaluation.

Allows for testing under controlled conditions of tension, speed, and stroke length.

Useful for quality control, product development, and material comparison.

Testers often have multiple stations for efficient testing of multiple samples.

Product Features:

Based on typical Zipper Fatigue Testers:

Mounting fixtures to securely hold the ends of the zipper tapes.

Mechanism to apply controlled lateral tension (pulling the tapes apart) or transverse tension (pulling the tapes away from the midline) to the zipper specimen, or a combination of both, as specified by the standard.

Motorized reciprocating mechanism to drive the zipper slider back and forth along the zipper chain.

Gripping mechanism to attach the tester's drive system to the zipper slider.

Adjustable stroke length to set the distance the slider travels during each cycle.

Adjustable speed control for the reciprocating mechanism, allowing the test to be run at a specified number of cycles per minute.

Digital cycle counter to accurately record the total number of opening and closing cycles performed.

Automatic stop function that halts the test when a predetermined number of cycles is reached or when a failure is detected (e.g., excessive force required to move the slider).

Safety guarding to protect the operator during testing.

Multiple testing stations (common) to allow simultaneous testing of several zipper specimens.

Specification

Item	Detail
Reciprocation stroke	75mm
Running speed	Adjustable
Width of lateral clamps	25mm
Combined weight of longitudinal clamps, balances and swivel plate	0.28kg-~0.34kg
Angle α	30° (specimen open), 60° (specimen closed)
Count range	1-999999
Power supply	220V 50Hz
Dimension	280mm×550mm×660mm 11.02inch×21.65inch×25.98inch
Net weight	35kg 77.16lb

Другие товары поставщика

	Photo fill light box	Standard CE & FCC Certified: Meets electromagnetic compatibility and safety standards for EU/US markets. RoHS Compliant: Lead-free constructi...
	Pressure Transmission Flow Meter Test Instrument	The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performan...
	Spray Aerosol Ignition Distance Tester	Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance ...
	Konan-Type Flammability Tester	Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.5.1 Test 1(b): Kernan...
	Qinsun SUNTEST XXL+	Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The exp...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...