Elastic Tape Fatigue Testing Machine

• 

This instrument is used to test the elasticity of elastic belt after reciprocating movement.

Application

Elastic Tape Fatigue Testing Machineis used to determine its repeatedly extend performance under maximum extension for elastic fabric and elastic band, also can be used to determine fatigue resistance of extensible material.

Standards

SATRA TM103:2018 Resistance of elastics to repeated extension

Features

Drive the elastomer sample to repeatedly elongate until it reaches effective growth limit. Regularly evaluate the damage and stop test when it reaches test times or damage exceeded a predetermined level.

Technical Parameters

Accessoriess

1 machine unit

1 power cord

1 instruction manual

1 delivery note

1 packing list

Test Procedures

1. Sample Pre-treatment

Cut a sample to fit the 170mm test clamp width and place it in a standard environment (23±2℃, relative humidity 50±2%, or 20±2℃, relative humidity 65±2%) for 24 hours.

2. Equipment Preparation

Connect to a 220V 50Hz AC power supply, check the overall status of the instrument, clear the test station, and ensure the equipment is free of any abnormalities.

3. Parameter Setting

Set the parameters through the instrument panel – the maximum stroke should not exceed 150mm, and the test speed should be adjusted to (65±5) cpm. Then, set the target number of cycles using the six-digit LCD counter (e.g., 10000 cycles).

4. Sample Installation

Securely clamp the pre-treated sample onto the test clamp, ensuring that the sample is subjected to even force and is not loose or skewed.

5. Start Testing

After confirming that the parameter settings and sample installation are correct, start the instrument to begin the reciprocating tensile test.

6. Process Monitoring

Regularly observe the sample status during the test and record any abnormalities such as damage or breakage.

7. Test Termination

The test automatically stops when the instrument reaches the preset number of cycles, or the test is manually terminated if the sample damage exceeds the standard (e.g., breakage rate > 10%).

8. Result Recording

Record the actual number of cycles using the LCD counter, and also record in detail any damage or breakage of the sample.

Другие товары поставщика

	Heel impact fatigue testing machine丨Heel impact fatigue tester	Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o...
	Diaper impurity testing machine	The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual...
	Carpet Dynamic Load Tester	Compliance Standards ISO 2094: 1999 (BS) QB/T 1091-2001 ASTM D3574 TEST I4 Instrument Features Provide information on the reduction in the thi...
	Ultraviolet Aging Testing Chamber	Equipment Description This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing the...
	Schopper Abrasion and Wear Tester丨Schopper Abrasion and Wear Test mechine	Testing Standards DIN 53863. part 2 , GME Standard 60345. GMW Standard 3283. VW/Audi Zentral-Norm PV 3908 Applications The Schopper Abrasion Tes...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...