Medical needle toughness tester

The Medical Needle Toughness Tester is designed to evaluate the mechanical strength and flexibility of medical needles under bending stress. It features a 5.7-inch LCD touch display (120 × 90 mm) and supports testing of three types of needle walls: normal, thin, and ultra-thin. The device is manufactured in compliance with GB18457 (“Stainless steel needle for medical equipment manufacturing”), GB15811 (“Sterile disposable injection needle”), and ISO 9626 standards.

This tester is ideal for R&D, quality control, and production verification of disposable medical needles.

Application

(1) Medical disposable injection needles – evaluating bending durability before packaging.

(2) Insulin pen needles – testing ultra-thin walls for high flexibility without fracture.

(3) Vacutainer blood collection needles – ensuring mechanical reliability during insertion.

(4) IV infusion needles and cannulas – verifying structural integrity under repeated bending stress.

(5) Specialty surgical needles – quality assurance for orthopedic or microsurgical applications.

Standards

The device meets and supports testing according to the following international and national standards:

(1) GB15811 – Sterile disposable injection needle

(2) GB18457 – Stainless steel needle for medical equipment manufacturing

(3) ISO 9626 – Stainless steel needle for medical use

Features

(1) High-precision touch LCD interface for intuitive operation.

(2) Adjustable bending angles for normal, thin, and ultra-thin needle walls.

(3) Automatic bi-directional bending for standardized toughness testing.

(4) High-brightness 4-digit LED display for accurate parameter monitoring.

(5) Supports multiple syringe diameters (0.2–3.4 mm).

(6) Compact and robust design with net weight of 10 kg.

(7) Free perpetual upgrades according to national standards.

(8) Complete accessory kit included for immediate testing.

Test Procedure

(1) Fix one end of the needle tube firmly in the jig.

(2) Adjust the span according to needle wall type:

Normal wall: 25° bending

Thin wall: 20° bending

Ultra-thin wall: 15° bending

(3) Apply force at the specified span position, bi-directionally, 20 times at a frequency of 0.5 Hz.

(4) Observe the needle for breakage, deformation, or failure.

Principle: One end of the needle is fixed. A force is applied from the fixed point to the prescribed span, bending in one direction and then in the opposite direction, repeated for the defined number of cycles.

Technical Parameters

Parameter	Specification
Syringe nominal specifications	0.2 – 3.4 mm
Test frequency	0.5 Hz
Rocker arm bending angle	15°, 20°, 25° (switch selectable, displayed on high-brightness 4-digit LED)
Bending distance	6 – 95 mm, accuracy ±0.1 mm (10 selectable spans)
Number of experiments	Bi-directional force 20 times
Net weight	10 kg
Overall dimensions (L × W × H)	300 × 240 × 240 mm
Standards	GB15811, GB18457, ISO 9626
Control & Display	5.7-inch LCD touch menu (120 × 90 mm)
Upgrade	Free perpetual upgrade according to national standards
Power supply	AC 220 V, 50 Hz
Part List	Host (1 set), Printing paper (1 roll), Fixture (1 set), Weight (1 set), Operating Instructions

Accessories

(1) Printing paper (1 roll)

(2) Needle fixture (1 set)

(3) Weight set for bending calibration

(4) Operating instructions in English/Chinese

Maintenance Information

(1) Keep the device clean and dry; wipe with a soft cloth after use.

(2) Check the calibration of bending angles and LED display periodically.

(3) Avoid impact or vibration to ensure precise mechanical performance.

(4) Follow local electrical safety standards for power supply and grounding.

Другие товары поставщика

	Respirator Fit Tester	The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by performing an aerosol leak test using the PortaCount particl...
	Face Mask Tensile Tester丨Face Mask Tensile Test machine	Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...
	Full Notch Creep Tester	Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f...
	Diaper impurity testing machine	The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual...
	Prefilled Syringe Plunger Force Tester	The Prefilled Syringe Plunger Force Tester is widely used in the medical device industry, mainly for testing the push - force performance of prefil...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...