Medical injection needle puncture force tester

The Medical Injection Needle Puncture Force Tester is a precision instrument designed to evaluate the puncture performance of medical needles. It simulates skin penetration and measures the maximum puncture force, providing reliable data for quality control, research, and production verification. Equipped with a 5.7-inch LCD touch screen, the device offers real-time force/displacement display, automatic data recording, and printing capability for accurate and repeatable measurements.

Application

This tester is suitable for a wide range of medical needle testing scenarios, including:

(1) Disposable medical injection needles – assessing sharpness and penetration performance.

(2) Insulin pen needles – evaluating puncture consistency and patient comfort.

(3) Blood collection needles (Vacutainer) – ensuring safe and reliable blood sampling.

(4) IV infusion needles and cannulas – testing ease of insertion and mechanical performance.

(5) Specialty surgical needles – evaluating microsurgical and orthopedic needle performance.

(6) Veterinary injection needles – verifying puncture efficiency and safety.

(7) Cosmetic or aesthetic needles – assessing penetration force and consistency.

Standards

The instrument complies with domestic and international standards for medical needle testing:

(1) GB15811-2016: Disposable sterile injection needles (China)

(2) ISO 17025: General requirements for the competence of testing and calibration laboratories (International)

(3) EN ISO 7864: Sterile hypodermic needles for single use (International)

(4) ASTM F2878-12: Standard Test Method for Puncture Resistance of Medical Needles (International)

Features

(1) Real-time display of puncture force and peak force for precise evaluation.

(2) 5.7-inch LCD touch screen with intuitive menu for simplified operation.

(3) Automatic data recording, printing, and analysis, including average force and deviation.

(4) Supports a wide range of needle diameters (0.3–1.2 mm) and wall thicknesses.

(5) Compact, portable, and lightweight, suitable for laboratory and production environments.

(6) Accurate simulated skin testing, compliant with GB15811 standards.

(7) Continuous software upgrade capability to align with updated national and international standards.

Parameters

Parameter	Specification
Nominal needle specification	0.3 – 1.2 mm
Test range	0.10 – 5.00 N, accuracy ±0.01 N
Moving speed	100 mm/min
Simulated skin material	Polyurethane membrane, compliant with GB15811
Display	5.7-inch LCD touch screen (120 × 90 mm)
Data output	Printable: 8, 13, or 20 tests per batch; average force and deviation
Net weight	11 kg
Dimensions (L × W × H)	400 × 290 × 240 mm
Standards	GB15811-2016, ISO 17025, EN ISO 7864, ASTM F2878-12
Upgrade	Free upgrade according to national standards

Accessories

(1) Main unit – 1 set

(2) Printing paper – 1 roll

(3) Needle clamp fixture – 1 set

(4) Weight set – 1 set

(5) Operating instructions – 1 set

(6) One-year warranty

(7) Free perpetual upgrade service according to national standards

Test Procedures

(1) Condition the needle and simulated skin at 22°C ± 2°C for at least 24 hours.

(2) Clamp the simulated skin in the fixture, ensuring no stretching or compression.

(3) Mount the needle perpendicular to the surface of the simulated skin, tip centered on the puncture zone.

(4) Set the device moving speed to 100 mm/min.

(5) Start the test. The instrument records maximum puncture force and force/displacement curve in real time.

(6) Print or save test data for analysis, including peak force, F5 peak force, and average deviation.

Maintenance Information

(1) Keep the device and simulated skin clean and free from dust.

(2) Inspect clamps and simulated skin regularly for wear or damage.

(3) Calibrate the force sensor periodically to maintain accuracy.

(4) Store the instrument in a dry, temperature-stable environment.

(5) Follow local electrical safety regulations for proper grounding and operation.

Другие товары поставщика

	Light Fastness Tester	Features and Benefits 1.Full-spectrum xenon arc lamps, when paired with window glass filters or outdoor filters, effectively simulate ultraviolet,...
	Film Heat Shrinkage Tester	The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio...
	Friction and wear testing machine	It can perform flat grinding, curved grinding, edge grinding, folded edge grinding, and abrasion resistance tests such as anti-frosting, edge seali...
	Carbon Rod for Aging Tester	Standard Compliant with ISO 9001. ASTM D3045. and IEC 60216 standards for material aging tests. Product Advantages Ultra-High Temperature Resist...
	Liquid Spontaneous ignition point tester	complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Test Method for Autoigni...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...