Building Materials Monomer Combustion test Dust Removal Equipment

• 

In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment. Therefore, a suitable equipment is required to carry out purification treatment. For this reason, our company have taken reference of a variety of forms of dust removal equipment at home and abroad to develop a new generation of dust treatment equipment combined with the actual situation of monomer combustion test together with foreign experts. The equipment can not only effectively reduce the smoke content in the pipeline in order to make the smoke emission in full compliance with national requirements, but also avoid the dust removal equipment to impact the exhaust gas flow rate.

Standards

GB/T 20284-2006 Monomer combustion test of building materials and products.

Technical Parameters

Features

1. Filter-type automatic cleaning dust collector with polymer anti-high temperature electrostatic coated filter media filter cartridge;

2. With the top vertical installation, the pulse cleaning system blows dust from the top to the internal filter cartridge;

3. Cartridge has a cover flange. The area between the cover flange and the board is sealed by rubber, and fixed with bolt;

4. Cleaning method is time sequential cleaning;

5. Electrical control cabinet uses Siemens PLC control.

6. Configured high-power fan directly controls the volume flow rate of the flue.

Другие товары поставщика

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a t...
	Spectrophotometer	Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri...
	Photovoltaic module backplane peeling strength testing machine	The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength of photovoltai...
	Metal ring friction and wear testing device	Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetoheatsamplesandwithheatflowmetertocalibration;Testsamp...

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...