Room Corner Tester，Room corner fire test equipment， ISO 13784

Introduction

According to ISO9705 of building materials fire prevention performance standards, this machine control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument, He-Ni laser smoke density measurement and control system, etc.

Entity room fire test methods forsurfaceof the article use the same principle with the cone calorimeter and SBI testmethod thatis based on the oxygen consumption. The method is to simulate the corner of the fire scene as a standard testconditions, and installation of a test sample entirely according to actual use, the test results apply only to specific sample installation, it is one of the most reliable standard test methods. In the corner fire test, in accordance with the requirements of ISO9705. and the measured material mounted on the inner walls of the room (at the top is not installed), Using propane burners as a radiation source, the measurement of heat release rate, temperature, heat release, flashover time, CO2 /CO and other parameters, for which the most important is the heat release rate and the flashover time.

Standards

• ISO 9705: LargeBOXtest surface of the product

• ISO 13784-1: plywood building systems Reaction to fire test

• ASTM E 1537: Standard upholstered furniture flame test method

• ASTM E 603: Standard guidance corner combustion experiments

Main Features

1. The test room is built by the density of 700kg / m³-A1 class fireproof material.

2. The internal dimensions of the room 3.6M X 2.4M X 2.4M

3. The gate size: 0.8M (W) X2.0M (H)

4. Sandbox burner with propane gas and equipped with emergency shut-off devices.

5. Automatic ignition system to automatically record experimental data;

6. Independently movabletimetto display units.

7. 10kV spark ignition, a cease-fire with safety devices. Fire extinguishing drainage system design.

9. Equipped withstaircasefor easy maintenance exhaust pipes.

Gas sampling and analysis system

1. Gas sampling system includes an annular sampler probe, suction pump, particulate filter, a cold trap, exhaust valve, water filters and CO2 filter.

2. Three filters; Minimum filtration accuracy is 0.5um.

3. Freezing cold trap; air-conditioning compressor refrigeration systems; controlling the temperature in 0 ~ 5ºC.

4. Suction pump,Flowrate is 33L/min,vacuumis 700mmHg, and pressure is 2.5 bar.

5. Drying cylinder, whichfilterthe water and impurities.

6. The flow controller to control the inspiratoryair flow.

7. The sampler has 12 holes and gas flow in the opposite direction, these holds built-in dust filter and 685mm from hoods.

8. Paramagnetic oxygen analyzer, the range is 0-25%; linear response; imports Britain Servomex oxygen sensor.

Smoke system

1. 0.5W HE-NE laser source.

2. Thorlabs optically detector.

3.Motor driven5 class automatically calibration device with of 0%, 25%, 50%, 75%, 100% transmittance filters.

4.One touchcalibration system in software with digital and curve display.

DAQ System

1. 16bit data acquisition module.

2. Digital communication between computer and DAQ module.

3. Labview based application software on DAQ and data analysis.

Operating systems

1. Labview based application system,easilyand precise to operate and control.

2. Test status, calibration status display onscreen.

3. Device statusaredisplayed on screen and indicators onpanel.

4. Transducers data, process parameters, test result displayed onscreenvia digital and curve.

5. Test and calibration procedure auto executed byPLCprogram.

6. Device can be controlled via bothapplicationscreen and control panel.

7. PC and PLC communicate withdigitalprotocol which is safe and robust.

Test data

1. Heat Release Rate (HRR),

2. Total Heat Release (THR),

3. Efficiency Heat Release (EHR),

4. Smoke Production Rate (SPR),

5. Time to Ignite (TTI),

6. Time to flameout,

7. Oxygen Consumption Rate,

8. CO2 Production Rate,

9. CO Production Rate(optional)

Technical parameters

1.Paramagn eticoxygen analyzer, the concentration range is 0~25%, an oxygen analyzer islinearresponse, Britain Servomex oxygen sensor; 10% to 90% response time of less than 12s; output noise does not exceed 50ppm;.Reproduce the measured values lower than 100ppm,

2. Infrared CO2 analyzer range: 0 to 10%;accuracyof ± 0.01%;

3. The compressor works: cold trap: 0 to 5 degrees;

4. Import diaphragm pump, flow rate: 33 l / min

5. The standard detector color accuracy ± 5%, output linearity (transmission) <1%, absolute permeability <1%;

Specification

Model	STD-ISO9705
Size	11.725(W)x4.000(D)x4.750(H)mm
Console Size	600(W)×750(D)×1800(H)mm
Power supply	AC 220V, 50/60Hz, 15A (control), AC 380V, 60Hz, 50A(drive)
Weight	About 7.500kg(Cabinet), 130kg(Control panel)
Instructions	Provided
Exhaust	Minimum 3.5m2/s(Measuring), Minimum300m2/min(Exhaust)
Other requirements	CO(0.8%)/CO2(8%), Compressed gas, Vacuum cleaners, Computers, Propane gas, Heptane gas, Nitrogen

Другие товары поставщика

	Torsional Fatigue Tester	Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freque...
	Deval abrasion testing machine	The Deval Abrasion Testing Machine is designed to measure the wear resistance of stones and aggregates under dry or wet conditions. It provides rel...
	Battery Powder resistivity meter	Standards YS/T 587.6-2006 GB/T 24525-2009 GBT 30835-2014 Product Advantages Unmatched Measurement Flexibility Dual-probe compatibility: Switc...
	Battery Adiabatic Calorimeter	Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201...
	Face Mask Tensile Tester	Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...

Все товары поставщика

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...