Helmets Designated Protection Areas Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all testing standards. It can define the upper, lower, left, and right fields of vision of the helmet, ensuring the helmet's effectiveness under different testing standards.

Application

1. Used to mark test points and test lines on helmets.

2. Used for line - marking according to different test standards.

3. Used to define the upper and lower fields of view as well as the left and right fields of view of helmets during research and development.

Standards:

GB 811-2010:Helmets for motorcyclists

Feature:

Infrared emitter;

Aluminum bracket (adjustable);

Angle of infrared bracket can be adjusted;

Aluminum alloy is used in the machine and all the accessories;

Main machine performance characteristics:

Adjustable handles on the arm can be easily adjusted to apply to different testing standards.

The fixed point tracking indicator adopts infrared control, which can be moved on the machine to find the base plane and reference plane easily.

The head support is made of steel with galvanized surface treatment, and there is a limiting device every 45°, which can easily rotate the head in any direction to adapt to different test points and test standards.

Parameters

Technical Parameter	Description
Infrared emitter usage	Adopts infrared emitters
Support structure	Uses adjustable aluminum alloy brackets
Adjustable angle of infrared bracket	The angle of the infrared bracket can be adjusted
Material of machine and accessories	The machine and all accessories are made of aluminum alloy
Applicability	Applicable to all standards

Accessoriess

The following are the names of the accessories for the helmet-designated protection area tester (using a helmet point and protection zone testing device as an example):

Infrared transmitter

Aluminum alloy bracket (adjustable type)

Working arm (with adjustable handle)

Tracking indicator light (infrared controlled)

Head-shaped support (steel with galvanized surface treatment, with limiting device)

Test Procedures

Helmet Installation: Mount the helmet onto the support frame of the testing equipment.

Applying Force: Apply a specific force using a force gauge for the impact test.

Data Recording: According to national standards, record the helmet's impact resistance, including cushioning performance and impact durability.

Testing Field of View and Protection Area: Use a field of view testing component and a laser emitter to test the helmet's field of view angle and protection area.

Data Analysis: Based on the test results, analyze whether the helmet's protective performance meets the requirements specified in the standards.

Другие товары поставщика

	Xenon Test Chamber/weather ometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This in...
	Sliding Bearing Fatigue Test device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. V...
	Wire Fire Resistance+ Mechanical Shock Testing Machine，IEC 60331	Whats/App: +86 156 1874 6768 Web: standard-groups.com Wires and cables that are hard to catch on fire and have the ability to prevent or delay th...
	Wet leakage current test system of photovoltaic module	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Wet Leakage Current Test System is designed for high-precision evaluation of insulation...
	Camera test light box	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resol...

Все товары поставщика

Похожие товары

	Battery Diaphragm Gas Permeability Tester ISO	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea...
	Torsion Testing Tester ASTM, JIS, and DIN	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma...
	Wire Torsion and Winding Tester ASTM and JIS	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes...
	Metal Wire Repeated Bending Tester ISO/DIS 7801	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ...
	Metal Wire Wrap Tester ISO 4101	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de...