Wind Tower Bending Machine

CNC variable geometry 3 roll plate bending machineadopts the structure of oil cylinder down. The upper work roll of the wind tower bending machineis the main driving roll: the upper roll is driven by the hydraulic motor (one motor) through the planetary reducer, and the two lower rolls are driven by the hydraulic motor planetary reducer respectively. The lifting of the upper roller is realized by a hydraulic cylinder, the lifting displacement is controlled by computer, automatic leveling, screen display, and synchronous precision ± 0.2mm.

The horizontal position of the two lower rollers can be adjusted independently, the horizontal movement adopts hydraulic transmission, and the center distance can be adjusted; The rolling cone stop is installed on the bearing seat of the lower roll on the overturning side to slow down the small end of the sector plate and realize the cone rolling in a certain range; General cone angle 30 °, 50% of full load. The tail part of the upper roll is equipped with a balance mechanism, which can easily unload the rolled workpiece and cylinder. The wind tower bending machine is equipped with a fixed console and a remote control button box, which is convenient for workers to use. And the wind tower bending machine is equipped with a safety interlock device to make the operation safer. The steel plate bending machine is simple to operate, easy to maintain, high rolling accuracy is an advanced and practical large plate rolling equipment.

The Specification Of Wind Tower Bending Machine

Model	Useful Length	Without Prebending	With Prebending	Working Speed	Dimensions
XW11S-150X3200	3200mm	150mm	135mm		10430x4970x5850mm

The Details Of EZHONG Wind Tower Bending Machine

- High-efficiency rolling speed, increase productivity, and can complete a cone roll in 20-30 minutes;

- The full set of coiling system of the EZHONG Groupwind tower bending machine only needs one operator to complete;

- High-precision rolling, the pre-bending, and rolling of the cone can be completed only through one-time rolling;

- The machine tool is powerful and reliable, and the EZHONG wind tower bending machine produces at least 200 complete wind towers every year;

- The upper support does not require any additional overhead lifting equipment for the machine tool, and the upper support can automatically tilt according to the cone angle;

- When the sheet metal forming machine is combined with a hydraulic clamp, it can automatically correct the plate and facilitate spot welding;

- The advanced feeding table can automatically adjust the plates, without the use of overhead cranes to adjust the plates;

- The feeding side support is equipped with a cylinder body error correction device, which can correct the axial and radial misalignment of the cylinder body (pipe section misalignment and correcting device), and the increase of the gripper pair can grasp both sides of the plate and expand back and forth, which is convenient for the plate to be fast;

- Aligned;

- EZHONG wind tower bending machine is equipped with a powerful CNC system, easy to operate, and PGS numerical control system can guide the operator to program.

Notes For Using EZHONG Wind Towers Bending Machine

Accurate measurement method of rolled cone parts

The Advantages Of Wind Tower Bending Machine

High-efficiency rolling speed, increase productivity, and can complete a section of cone in 20-30 minutes;

The full set of coiling system of the EZHONG wind tower bending machine only needs one operator to complete;

The roller adopts high-strength and long-life solid bearing roller with long service life and small deformation.

The transmission gear is made of forged high-carbon steel, which has high hardness and strong wear resistance;

The whole wind tower bending machine adopts integral steel plate welding, which is thick and beautiful, and has good stability.

Другие товары поставщика

	Horizontal Axle Press Machine	The horizontal press machineis the installation equipment for the rolling bearing of the railway vehicle system. Its main purpose is to press the r...
	20x2500mm 3 Rolls Bending Machine	The upper roller of the EZHONG plate bending machineis at the symmetrical position of the two lower rollers through the hydraulic oil in the hydrau...
	Sheet Metal Forming Machine For Aircraft	EZHONG sheet forming machines sell well in the aerospace and defense sectors. The plane heat press machines can produce aircraft parts and componen...
	Profile Bending Machine	The profile bendingmachine is special high-efficiency processing equipment for the bending of various profiles such as angle steel, channel steel, ...
	Plate Rolling Machine For Tank	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting is the hydraulic transmission. The hydraulic oil i...

Все товары поставщика

Похожие товары

	Profile Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The profile bending machineis special high-efficiency processing equipment for the bending of var...
	Plate Rolling Machine For Tank	Продавец: Hubei Heavy Industry Equipment Co., LTD	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting i...
	Plate Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The plate bending machine chinais forging equipment used to bend metal plates. It is dedicated to...
	Plate Leveling Machine For Sale	Продавец: Hubei Heavy Industry Equipment Co., LTD	EZHONG specializes in the production of heavy plate leveling machines, composite plate levelers, ...
	Hydraulic Press	Продавец: Hubei Heavy Industry Equipment Co., LTD	As a professional hydraulic press machine factoryin China, Ezhong Groupspecializes in producing s...