3 Rolls Plate Bending Machine

The CNC 3 roller pipe bending machineadopts the structure of the lower cylinder. The upper working roller of this 3 roll bendingmachine is the main driving roller: the upper roller is driven by a hydraulic motor (a motor) through a planetary reducer to drive the upper roller to rotate, and the two lower rollers are respectively driven by a hydraulic motor planetary reducer to drive the lower roller to rotate. The lifting of the upper roller is realized by hydraulic cylinder, the lifting displacement is controlled by computer, automatic leveling, screen display, synchronization accuracy ±0.2mm; the horizontal position of the two lower rollers can be adjusted separately, the horizontal movement adopts hydraulic transmission, the center distance can be adjusted; the side lower roller bearing seat is equipped with a cone stopper to slow down the small end of the sector plate to achieve a certain range of cone rolling; the general cone angle is 30°, 50% of the full load. EZHONG 3 roller plate bending machine priceis very reasonable, contact us to know more about it.

The tail of the upper roller of this kind of large plate bending machine is equipped with a balance mechanism, which can facilitate the unloading of the rolled workpiece and the cylinder. The three roller pipe bending machine is equipped with a fixed console and a remote control button box, which are convenient for workers to use. This 3 roller pipe bending machine is equipped with a safety interlocking device to make the operation safer. This kind of large plate bending machine has features of simple operation, convenient maintenance and high rolling precision. It is an advanced and practical large-scale CNC plate bending machine. As one of the professional 3 roller bending machine manufacturers, EZHONG has an advanced and practical large-scale 3 roller bending machine for sale at competitive prices.

3 Roller Bending Machine For Sale

20x2500mm 3 Rolls Bending Machine



Related EZHONG 3 Rolls Bending Machine

80x3200mm 3 Rolls Bending Machine

120x3200mm 3 Rolls Bending Machine



140x4500mm 3 Rolls Bending Machine

160x3500mm 3 Rolls Bending Machine



270x3500mm 3 Rolls Bending Machine



Three Roll Bending Machine Working Principle

Working Principle Of Three Rolls Bending Machine

The controlled movement of the lower roller makes the pre-bending operation very easy.

Working Principle Of 3 Roll Bender

The reduction of the distance between the lower rollers can better drag the plate, which facilitates the subsequent bending of products with smaller diameters and thicknesses, and facilitates the measurement of curved plates that must be welded.

Working Principle Of 3 Rolls Bending

Increasing the distance between the lower rollers makes it easier to bend thick plates.

During pre-bending, the steel plate is kept in a horizontal position, which ensures better safety conditions for the operator.

Due to the upper profiled roller operating system, the three roll bending machine can be used as a traditional press to perform pressing and measure the finished product.

In the same way, very thick cone plates and curved plates can also be produced through different pressing operations.

EZHONGThree Roll Bending Machine Advantage



High-precision end of the pre-bending, set the length of the straight edge freely; direct pressure on the pre-roll bending, high-precision can be completed in advance of the end of the bend.

CNC control, high productivity products rolling process parameters NC, a simple and substantial increase inefficiency.

The roller of metal fabrication equipment assumes the bulging form on products accuracy hyper group, have asking a roller to coordinate adjustment, continuous bending on time of roller lower part, this one broad range inner is able to make ideal products roll from lamina to plank.

The 3 roller pipe bending machine is operated under the security of two fixed roll, roll up and down on, move around, do not work with mobile work roll, operations safely.

Другие товары поставщика

	Plate Rolling Machine For Tank	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting is the hydraulic transmission. The hydraulic oil i...
	4 Rolls Plate Bending Machine	EZHONG CNC four-roller plate bending machine has the function of pre-bending the end of the sheet. This kind of heavy rolling machine has four work...
	Sheet Metal Forming Machine For Aircraft	EZHONG sheet metal roll forming machinessell well in the aerospace and defense sectors. The plane heat press machines can produce aircraft parts an...
	Станок для выравнивания пластин	Станок для выравниванияпластин EZHONGправильный станок для листового металлатяжелых листов, правильных машин для композитных листов, высокопрочн...
	3 Rolls Plate Bending Machine	EZHONGis located in the ancient city of Wudu - Ezhou City, Hubei Province. It is one of the heavy forging and shaping equipment enterprises designa...

Все товары поставщика

Похожие товары

	Profile Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The profile bending machineis special high-efficiency processing equipment for the bending of var...
	Plate Rolling Machine For Tank	Продавец: Hubei Heavy Industry Equipment Co., LTD	The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting i...
	Plate Bending Machine	Продавец: Hubei Heavy Industry Equipment Co., LTD	The plate bending machine chinais forging equipment used to bend metal plates. It is dedicated to...
	Plate Leveling Machine For Sale	Продавец: Hubei Heavy Industry Equipment Co., LTD	EZHONG specializes in the production of heavy plate leveling machines, composite plate levelers, ...
	Hydraulic Press	Продавец: Hubei Heavy Industry Equipment Co., LTD	As a professional hydraulic press machine factoryin China, Ezhong Groupspecializes in producing s...