Semi-Solid Die Casting

• 

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and applied over 30 years world wide. The main principle of this technic is to perform a strong stir during the metal phase change from liquid to solid, thus break the cylindrical and dendritic crystal to achieve much smaller grain size. While this phase still maintains certain flow property, the die casting could be performed to the metal.

The Advantages Of Semi-solid Die Casting

The advantage of semi-solid die casting is contributed from the very nice microstructure product it resulted in. As the rough big crystal was removed, leaving small, even, dense structure metal, the final products possess a number of the fine properties, and the casting process is more controllable as well.

Semi-Solid Forming Principle

The unique rheological and churning properties of non-dendritic semi-solid metals (SSM) are used to control the quality of castings. The three stages of liquid, solid, and semi-solid metals exhibit distinct physical properties, and these properties have led to a variety of methods of solidification, plasticity, and semi-solid metal forming. Semi-solid metals (alloys) are internally characterized by the coexistence of mixed solid-liquid phases and the presence of metallic liquids at grain boundaries, which vary in the state depending on the solid phase fraction. It can be seen that at high solid phase fraction, the liquid phase component is limited to some of the grain boundaries; at low solid phase fraction, the solid phase particles are free in the liquid phase component.

Advantages of Semi solid Die Casting

Higher viscosity than liquid metal, easier to control: less gas entrained in the mold, less oxidation, improved processability, less mold bonding, higher speed part forming, improved surface finish, easy automation, and formation of new processing processes.

Lower flow stress than solid metal: semi-solid slurry has rheological and thixotropic properties, very small deformation resistance, can form parts at higher speeds and can perform complex part forming, shorten processing cycles, improve material utilization, contribute to energy and material savings, and allow high-speed forming of continuous shapes (such as extrusion) and low processing costs.

Wide range of applications: all alloys with the solid-liquid two-phase area can achieve semi-solid processing, can be applied to a variety of processing processes, such as casting, rolling, extrusion and forging, etc., and can be used for material compounding and forming.

Rayforce Manufacture is a privatefoundry manufacturer, we provide metal casting china, vacuum die casting and etc. Want to know more? Please contact us.

Другие товары поставщика

	Sand Casting	Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy bot...
	Metal Casting	Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
	Low Pressure Die Casting	The low pressure casting machineis to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting ...
	Brass，Bronze，Copper Casting	As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But nat...
	Metal Casting	Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...

Похожие товары

	CNC TURNING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...
	CNC MILLING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	As an excellent CNCmilling manufacturerin China, HQ is equipped with types of CNC that allow us t...
	CNC MACHINING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	CNC machiningis short for Computer Numerical Control machining which is an important processing m...
	ALUMINUM CNC MACHINING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	Wholesale Aluminium Milling Service Since its excellent strength-to-weight ratio, aluminium is o...
	ALUMINIUM CASTING PRODUCTS	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	HQ accumulated years of experience in aluminium die casting productsand accumulated technical kno...