Die casting

High precision die castinginvolves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting process is a different feature from other casting methods. Typically the melted metal was filled into the mold with high pressure and speed, and solidification under pressure as well to form the casted part. Usually, the pressure applied during the casting process is over dozens of Mpa, with the meatal pouring speed of 16~80 m/s, the liquid metal only takes 0.01~0.02 seconds to fully fill the die cavity.

Types of Gravity Die Casting

Low Pressure Die Casting

Low-pressure casting is a method to form castings by filling the cavity with liquid metal under pressure. Casting formability is good, conducive to the formation of clear contours, and clean surface castings. Large thin-walled castings are more favorable to the formation. The organization of products made by die casting is precise and has high mechanical properties.

Vacuum Die Casting

Rayforce vacuum die casting is an advanced die casting process that eliminates or significantly reduces porosity and dissolved gases in die castings by removing the gas in the die cavity during the die casting process, thereby improving the mechanical properties and surface quality of die castings.

Squeeze Die Casting

In Rayforce squeeze die casting process, the metal liquid is poured directly into the cavity without the pouring system, so there is less air absorption and the casting can be heat treated. There is no pouring system, the metal liquid fills the cavity under pressure, crystallization and solidification, good shrinkage effect, fine grains, dense and uniform organization.

Semi-Solid Die Casting

In Rayforce semi-solid die casting process, strong stirring is carried out during the solidification of liquid metal, so that the dendritic network skeleton, which is easily formed by ordinary casting, is broken up to form a scattered granular tissue form, thus making a semi-solid metal liquid, which is then die-cast into billets or castings.

What Are the Types of Die Casting?

Die casting is a casting method in which a liquid or semi-solid metal or alloy, or liquid metal or alloy containing an enhanced phase, which is filled into the cavity of a die casting mold at a high rate under high pressure, and the metal or alloy is solidified under pressure to form a casting. The pressure commonly used in die casting is 4~500MPa, and the die cast metal filling speed is 0.5-120m/s. Therefore, high pressure and high speed is the fundamental difference between die casting method and other casting methods and is also an important feature.

The principle of die casting is mainly the principle of pressure injection molding of the metal fluid. The die casting conditions are usually set by adjusting the speed and pressure on the die casting machine, as well as the switching position of the speed, and the rest is selected in the die casting mold line.

Characteristics Of The Die Casting Process

Die casting is a casting method in which molten alloy liquid is poured into a press chamber, filling the die casting mold cavity of a steel mold at high speed and causing the alloy liquid to solidify under pressure to form a die casting mold.

The main feature of die casting that distinguishes it from other casting methods is high pressure and high speed.

The die cast metal fluid is filled into the die casting mold cavity under pressure and crystallized and solidified under higher pressure, commonly 15-100MPa.

The die cast metal liquid fills the die casting mold cavity with high speed, usually at 10-50m/s. Some can also exceed 80m/s, (the linear speed of the cavity through the internal gate-internal gate speed), so the filling time of the die cast metal liquid is very short, about 0.01-0.2 seconds (depending on the size of the casting and difference) within. The die casting mold cavity can be filled within 0.01-0.2 seconds (depending on the size of the casting).

What Are The Advantages To Using Die Casting?

The die casting process has several obvious advantages such as high production efficiency, low operation skills requiring, high accuracy, and tolerance class for the finished product. As a result, a portion of raw material is saved and further machining process is not required either. Also, the die casting is able to produce detailed parts, which is a perfect option for the big amount of pieces production. So generally speaking, the die casting is considered to be efficient, economic, a broad range of shape capable, long life, versatile applied casting process. Especially for the aluminum and alloy die cast metal parts, it has been widely applied.

Why Die Casting Is Used

Due to the advantages of die casting, it is widely used, mainly in the mass production of non-ferrous alloy castings.

In the die casting production, accounting for the largest proportion is aluminum alloy die casting, which is 30% to 50%; followed by zinc alloy die casting; copper alloy die casting accounted for 1% to 2%. Application of die casting most is the automobile, tractor manufacturing, followed by instrument manufacturing and electronic instrument industry, and then agricultural machinery, defense industry, computer, medical equipment, and other manufacturing industries.

The parts produced by die casting mold are engine cylinder block, cylinder head, transmission case, engine cover, instrumentation and camera shell and bracket, pipe fittings, gears, etc.

In recent years, high technology has been applied to the field of the die casting mold. Such as the use of a three-stage injection mechanism to control the pressure, injection speed, and gas in the mold. The development of special die casting processes (such as vacuum die casting, directional pressure casting, oxygen die casting, etc.) and the application of computer control technology, effectively remove the pores, improve the density of the casting, while developing new die casting mold materials and heat treatment of new technology to extend the service life, so that the ferrous die casting metal has made some progress.

If you want to buy die casting, please contact us.

As a castings company, we will provide more types of related products for sale, anything you need, please leave us a message.

Другие товары поставщика

	Aluminum Casting	Aluminum is a lightweight metal with silvery-white color. Because of its chemical features, aluminum never exists in the metallic form in nature. B...
	Green Sand Casting	Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, ...
	Low Pressure Die Casting	The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting par...
	Silica Sol Investment Casting	The silica sol also shares the name of water glass in general. It is used in the metal casting process as mold adhesive which is mixed with sand an...
	Die casting	Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the proc...

Все товары поставщика

Похожие товары

	METAL BRACKETS	Продавец: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	Инжекционная машина для керамических стержней	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Инжекционная машина для керамических стержней является основным оборудованием для производства вы...
	Одностанционный восковой инжектор	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Восковой инжектор используется для производства восковых форм в производственной линии для точног...
	Автоклав для удаления воска	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Автоклав для удаления воска является специализированной машиной для удаления воска в технологичес...
	CNC TURNING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...