Sand Casting

Sand casting chinais the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to dozens of tons, or even be heavy to hundred tons.

The disadvantage of sand casting is, relatively simple structure part is suitable for it. And sand castings generally have a rough surface sometimes with surface impurities and surface variations. The internal density of a part made by sand casting also is lower than some more advanced casting methods such as investment casting or die casting.

Types Of Sand Casting

Sodium Silicate Sand Casting

Rayforce sand casting factoryhas complete casting production equipment, advanced physical and chemical analysis, testing equipment, and excellent sand casting materials, to meet the requirements of customers of different grades of products.

Green Sand Casting

Green sand casting is the most widely used and convenient molding method. Usually using coarse sand (to make a high permeability), adding more clay and water, and sometimes adding 1 to 2% of wood chips in the sand (to improve the ability to resist sand trapping scars), its cavity surface can be coated with paint.

Features Of Sand Casting

relatively inexpensive production cost



low costs for equipment and tooling



suitable to both small quantity production and large quantity production



easy forming of large or complex parts



short lead times



more material options

What Is the Sand Casting Process

Making the pattern

The pattern is in the same shape and dimension as the desired part, but the allowance for thermal contraction and shrink shall be considered.

Create the gates and risers

This step is also included during "step 1: making the pattern". The gates and risers give the pathways for metal flow during the sand casting process, and let the gas venting as the designer expected.

The mold creating

The mold can be deemed as a box (halves, made by wood or metal) firmly filled with sand in the desired shape. Typically the mold is in 2 pieces, the top part names "cope", the lower part names "drag". These 2 pieces were separated after the sand forming is completed, then remove the pattern. Usually, the refractory coating is applied to the sand so that having a better surface finish and help to protect the mold during the metal pouring in the next step. Then close the 2 pieces of mold to leave a cavity inside with the proper shape of the desired product.

Pouring the metal

Heating the metal until it's melted completely at a certain temperature, then pure the liquid into the static mold. Along with the melted metal flow inside the cavity and cooled slowly, the solid part will be created eventually. The heating temperature and the speed of cooling down of melt metal are very important factors during this sand casting process because overheated or less heated metal is all might cause some defects on the final product, such as crack, hole, porosity, etc.

Shake out

After cooling down, open the sandbox to fetch the casting part. The removed sand could be reused in future production after necessary treatment.

Final operations

Remove the undesired part from the casting product. To have a better surface finish, usually, the ball mill process will be followed. If necessary, further machining process, heating treatment, and so on will be needed to achieve the final required product.

What Are The Advantages Of Sand Casting

Sand casting is one of the casting processes. The mold used in sand casting is usually composed of an outer sand mold and a core. Because the sand casting molding materials used are inexpensive and easy to obtain, easy for casting manufacturing. As for single-piece production of castings, batch production and mass production can be adapted, for a long time. The sand casting process has been the basic process of casting production. At present, internationally, in the production of all castings, 60 to 70% of the castings are produced with sand, and about 70% of them are produced with clay sand.

But the most advantage of sand casting is the low production cost. It can be used by both hand molding and machining molding. Hand molding is suitable to single and small quantity ordered product or applies to big, complicated shaped casting part which is too hard to use by machining molding. The machining molding is able to noticeably increase the surface quality and the degree of accuracy of the casted part, but it's quite expansive.

What Type of Sand Is Used for Sand Casting

The basic raw sand casting materials for manufacturing sand forms are foundry sand and sand binder. The most commonly used foundry sand is silica sand. When the high-temperature performance of silica sand cannot meet the requirements, zircon sand, chromite sand, corundum sand, and other special sand are used in the sand casting process. In order to make the sand type and core with a certain intensity, in handling, closing, and pouring liquid metal will not be deformed or damaged, generally in the to add sand binder, the loose sand particles bonded together into the sand.

The most widely used sand binder is clay, which can also use a variety of dry oil or semi-dry oil, water-soluble silicate or phosphate, and a variety of synthetic resins for sand binder.

The external sand type used in the sand casting process is divided into three types: clay wet sand type, clay dry sand type, and chemically hardened sand type according to the binder used in sand and the way it builds strength.

What Is The Process Of Sand Casting

The process in the sand molds for the metal casting production preparation process must be reasonable to develop the casting process plan and drawing out the casting process diagram.

The casting process diagram is a graphical representation of the casting process plan with various process symbols in the part diagram, including the casting location, casting parting surface, the number, shape, fixing method and order of cores, machining allowance, mold slope, shrinkage rate, pouring system, riser, size and arrangement of cold iron, etc. The casting process diagram is the basic process document to guide the design of mold pattern (core box), production preparation, mold manufacturing, and casting inspection. According to the casting process chart, combined with the selected modeling method, you can draw a mold pattern and box together.

Now the sand casting priceis reasonable, if you have needs to buy sand casting, please leave us a message.

If you are looking for reliable a metal casting manufacturer, please contact us, and we will do our best to meet all the needs of customers.

Другие товары поставщика

	Resin Sand Casting	Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and so...
	Investment Casting	Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. I...
	Investment Casting	Direct investment casting, also called the lost-wax casting process, is actually an ancient metal investment casting technologywith a history of ov...
	Sodium Silicate Sand Casting	Sodium silicate sand castingis soluble in water in various amounts. A more common name for sodium silicate is water glass, which is used in iron or...
	Squeeze Die Casting	The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the ca...

Все товары поставщика

Похожие товары

	METAL BRACKETS	Продавец: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	Инжекционная машина для керамических стержней	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Инжекционная машина для керамических стержней является основным оборудованием для производства вы...
	Одностанционный восковой инжектор	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Восковой инжектор используется для производства восковых форм в производственной линии для точног...
	Автоклав для удаления воска	Продавец: Qinhuangdao Aifu Science & Technology Co., Ltd.	Автоклав для удаления воска является специализированной машиной для удаления воска в технологичес...
	CNC TURNING	Продавец: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...