600m Drilling depth Factory Price Water Well Drilling
- adopts full hydraulic control, the top drive drives the drilling tool to rotate, and the drilling efficiency is high.
- Using Cummins 113kw generator, strong power and long service life. Oil pump imported from Italy, 3 oil pumps
- The overall layout is reasonable, and the traction or all-ground chassis is used for transportation, with good maneuverability.
- It is very flexible on difficult roads, and can be widely used in hydrological well resource exploration, coalbed methane, shallow shale gas, geothermal and other fields, and can also be used in coal mine gas mining and salvage work.
- The main shaft of the top-mounted drive head has a large diameter, which is suitable for various construction operations such as mud drilling, air drilling, and air foam drilling, and meets the drilling needs of different formations.
- The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life
- Dual system: 1. Air power system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-350
Hole depth.Max: 600m
| The weight （T） | 11.5 |
|---|---|
| The hole diameter （mm） | 140-350 |
| Drilling depth （m） | 600 |
| One-time advance length （m） | 6.6 |
| Walking speed （km/h） | 2.5 |
| Climbing angles （Max.） | 30 |
| Equipped capacitor （kw） | 113 |
| Using air pressure （MPA） | 1.7-3.5 |
| Air consumption （m³/min） | 17-42 |
| Swing speed（rpm） | 45-130 |
| The penetrationefficiency （m/h） | 15-35 |
| Drill pipe diameter （mm） | φ102 φ108 φ114 |
| Drill pipe length （m） | 1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） | 28 |
| Rapid rise speed （m/min） | 20 |
| Fast feedingspeed （m/min） | 40 |
| Width of loading（m） | 2.85 |
| Hoisting force of winch （T） | 2 |
| Swing torque （N.m） | 8500-10000 |
| Dimension （mm） | 6300×2200×2650 |
| Equipped with hammer | Medium and high wind pressure series |
| High leg stroke （m） | 1.7 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
430-1 Φ115-152mm Separated DTH Mine Drilling Rig Hole | This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min... |
 |
700m Drilling depth Water well drilling rig | Each drilling rig is equipped with a baffle on the main arm to protect the oil cylinder; The diameter of the hole is large, the hole is deep, an... |
 |
500m Drilling depth Full Hydraulic Crawler Mounted Water Well Borehole Drilling Rig | Traveling device: equipped with new traveling motor and reducer, with long service life. Hydraulic oil pump: imported from Italy, parallel gearb... |
 |
D435 Φ90-138mm High Quality Quarry Mining Equipment Integrated Surface Dth Drilling Rig | The RuiXin D435 is outfitted with a foldable boom integrated with a 360° rotating mechanism—a design that endows it with exceptional oper... |
 |
D545H Φ115-138mm DTH mining Blasthole Drilling Rig | The RuiXin drill rig stands out for its ability to maintain high drilling efficiency while keeping energy consumption low. It perfectly meets the r... |
Похожие товары
 |
YZH WHEN1500 Стационарный гидравлический манипулятор | Продавец: Шаньдунская компания базовой инженерии | Ниже приводится подробное описание стационарной гидравлической стрелы для демонтажа YZH WHEN1500,... |
 |
YZH WHEN1410 Стационарный дробилка | Продавец: Шаньдунская компания базовой инженерии | YZH WHEN1410 Стационарный педестальный рокбрейкер - это специализированное оборудование, предназн... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Продавец: Шаньдунская компания базовой инженерии | Особенности стационарного педестального рокбрейкера WHEN 1300:Интеллектуальное многорежимное упра... |
 |
WHE1500 Pedestal Breaker Boom Systems | Продавец: Шаньдунская компания базовой инженерии | Характеристики системы консоли выключателя WHE1500:Базовая дробилка WHE1500 представляет собой сп... |
 |
WHEN1850 boom breaker | Продавец: Компания гуанси по производству машинного оборудования | A high-performance crushing equipment is crucial in the secondary crushing process of industries ... |
