500m Drilling depth Full Hydraulic Crawler Mounted Water Well Borehole Drilling Rig
- Traveling device: equipped with new traveling motor and reducer, with long service life.
- Hydraulic oil pump: imported from Italy, parallel gearbox design, oil pump separation, provide.
- Sufficient and reasonable power distribution. The advanced hydraulic system has unique design, simple maintenance and low cost.
- Power head device; the box body is integrally formed, and the dual motors provide greater power, greater torque, more durability, and lower maintenance costs.
- Drilling rig chassis; (professional drilling rig chassis), classic and durable, load-bearing, wide chain plate width, less damage to hard roads.
- Lifting force: The designed composite boom is used, which is small in size, long in stroke, double-cylinder lifting force, and large in lifting tonnage of the rig; the boom configured on the rig body is equipped with a limit device to protect the safety of the oil cylinder. ensure work safety.
- Each hydraulic oil pipe is covered with a thick protective sleeve, which makes the oil pipe have a longer service life.
- The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life.
- Dual system: 1. Air power system with air compressor 2. Mud pump system with mud pump.
Optimal Hole Range: φ140-350
Hole depth.Max: 500m
| The weight （T） | 9.5 |
|---|
| The hole diameter （mm） |
140-350 |
| Drilling depth （m） |
500 |
| One-time advance length （m） |
6.6 |
| Walking speed （km/h） |
2.5 |
| Climbing angles （Max.） |
30 |
| Equipped capacitor （kw） |
118 |
| Using air pressure （MPA） |
1.7-3.5 |
| Air consumption （m³/min） |
17-42 |
| Swing speed（rpm） |
45-130 |
| The penetrationefficiency （m/h） |
15-35 |
| Drill pipe diameter （mm） |
φ102 φ108 φ114 |
| Drill pipe length （m） |
1.5m 2.0m 3.0m 6.0m |
| Rig lifting force （T） |
26 |
| Rapid rise speed （m/min） |
20 |
| Fast feedingspeed （m/min） |
40 |
| Width of loading（m） |
2.85 |
| Hoisting force of winch （T） |
2 |
| Swing torque （N.m） |
7500-10000 |
| Dimension （mm） |
6150×2200×2600 |
| Equipped with hammer |
Medium and high wind pressure series |
| High leg stroke （m） |
1.6 |
Другие товары поставщика
|
|
421H Φ90-127mm Surface Mine Infrastructure Construction Integrated Dth Surface Drill Rig |
This model is equipped with a larger two-stage screw air end, which meets the requirements for an optimal hole diameter of 90–115 mm. When dr... |
|
|
412B-1 Φ76-110mm Separated DTH Mine Drilling Rig Hole |
This series of separated DTH (Down-the-Hole) drill rigs has been primarily deployed in medium and small-sized quarries, cement mines, open-pit coal... |
|
|
Find best open pit drilling for your project |
RX EQUIPMENT is one of the main companies in China that supply mining equipment,mining transportation equipment such as DTH Drill Rig, Anchor Drill... |
|
|
700m Drilling depth Water well drilling rig |
Each drilling rig is equipped with a baffle on the main arm to protect the oil cylinder;
The diameter of the hole is large, the hole is deep, an... |
|
|
1200m Core Rock Drilling Rig |
Reliable performance： According to the guidelines for international procurement of key auxiliary equipment, diesel engines, hydraulic pumps, main v... |
Все товары поставщика
Похожие товары
