Automatic Foil Stamping&Die Cutting Machine
We designed 1050FH Automatic Foil Stamping Die Cutting Machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.
This automatic foil stamping machineand automatic foil printing machineadopts many international advanced pneumatic and servo-driven processing technologies. After strict quality control of assembly, our automatic foiling machine has the advantages of simple operation, safety and reliability.
This automatic foiling machinecan perform stamping, creasing and die-cutting operations after printing on paper, cardboard, corrugated paper less than 4mm, paste paper and laminated paper of 80g/m² or more.
When the speed of automatic foil stamping & die cutting machinereaches 7,500 sheets/hour, the good quality and design make the machine work stably as well as ensure safety. As one of the mature automatic die cutting machine manufacturers, we produce machines that will provide you with a comfortable operation and faster return on investment.
Features of Automatic Foil Stamping&die Cutting Machine
Feeder/Feeding Section
Imported high quality feeder, high precision, stable in high speed.
Four suction nozzles, four sending nozzles, ensure feeding smoothly.
Adopt imported screw air-blowing device, it could make the sheet send smoothly.
Suction angle and height can be adjustable.
Non-stop paper feeding device
Double sheet detecting system
Suction-blow two function vacuum pump
The design of stacker preparatory
stage was improved, it could use
prepared car sheet piling. Also could
use ordinary hydraulic car sheet piling
to stacker directly.
Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull guide and push guide, accounting to paper choose, it makes switch easier. It could switch front rise position arriving reduction of speed device, it is benefit of thin paper’s location.
Cutting Section/Horizontal and vertical foil stamping system
Adopt advanced technology with single gripper location could adjust the front-and-back registration. Horizontal hot stamping dual-anxis/Vertical hot stamping collection of waste foil frame into operation side, it is benefit of operation. 12 electric heating areas have timing penumatic temperature controller function, each area can be controlled separately. It makes foil-delivering servo curve tracking the speed variation of machine in time for using motion controller. So it could reach the foil-delivering smoothly.
Foil Stamping/ Die Cutting Section
The driving gear ensures high speed of die cutting together. The pneumatic locking mechanism and air clutch are fast and stable. The die cutting frame can prevent the die cutting plate from drooping or separating effectively.
Quick Changed Foil Device
Vertical under foil frame could be pulled out of machine, so that it could make the foil work more convenient.
Rewinding Device
There has brush rewinding foil function. And it has equipped with a re-coil collection waste foil device. The buffer force prevent the foil from broken.
Delivery Section
Delivery section add tester into security system. It is equipped with inset counter. Using subsection could adjust brush and sheet air-blowing device, so the finished product of delivery section could product stably. Gripper drive train expanded buffer device. A non-stop paper delivery device bring high efficiency and fast return.
Specification of Automatic Foil Stamping&die Cutting Machine
|
|
Inner Chase Size 1080×745 mm |
|
Steel Plate Size 1080×736 mm |
|
Processed Materials Cardboard：80~2000 g/m² Corrugated Paper：≤4mm |
|
|
Gripper Margin 8 mm |
|
|
Total Weight 16.8 T |
|
Dimension (L×W×H) 7060×4200×2230 mm |
|
|
Foil Shaft V3+H2 |
|
Vertical foil stamping section performance specification |
|
|
Horizontal foil stamping section performance specification |
|
|
Foil stamping system&other comprehensive performance specification |
|
Stamping temp. adjustable range 0℃~200℃ |
|
Heating zones 12 |
|
Heated Plate Power 24 kw / 24kw |
|
Total Power 57 kw |
|
Voltage Requirements 380V 50Hz |
|
Air compressor 0.8Mpa, 0.36m² /min |
|
Accessory |
Brand |
Place of Origin |
|
|
1 |
Photoelectric Switch |
SUNX |
Japan |
|
2 |
HMI |
WEINVIEW |
Taiwan |
|
3 |
Button |
SCHNEIDER |
France |
|
4 |
SIEMENS |
Germany |
|
|
5 |
Solid State Relay |
FOTEK |
Taiwan |
|
6 |
PLC |
MITSUBISHI/PANASONIC |
Japan |
|
7 |
Electric Horn |
QLIGHT |
Korea |
|
8 |
Magnetic Valve |
SMC |
Japan |
|
9 |
Oil-water Separator |
AIRTAC |
Taiwan |
|
10 |
Motor Breaker |
SIEMENS |
Germany |
|
11 |
Servo Motor |
YASKAWA |
Japan |
|
12 |
Main Motor |
TECO |
Taiwan |
|
13 |
Gear Motor |
CPG |
Taiwan |
|
14 |
Oil Pressure Switch |
ARK |
Korea |
|
15 |
Pneumatic Clutch |
OMPI |
Italy |
|
16 |
Paper Feed Clutch |
MIKIPULLEY/OGURA |
Japan |
|
17 |
Torque Limiter |
JASU |
Taiwan |
|
18 |
Indexing Drives |
TAN TZU |
Taiwan |
|
19 |
Vacuum Pump |
BECKER |
Germany |
|
20 |
Feeder |
YONGCHUAN |
Taiwan |
|
21 |
Feeder Nozzle |
SILENT |
Sweden |
|
22 |
Tooth Row Drive Chain |
RENOLD |
Britain |
|
23 |
Other Drive Chain |
TYC |
Taiwan |
|
24 |
Tooth Row |
JASU |
Taiwan |
|
25 |
Bearing |
FALA/IKO |
Germany/Japan |
|
26 |
Rotary Joints |
DEUBLIN |
America |
|
27 |
Timing Belt |
OPTIBELT |
Germany |
|
28 |
Paper Feed Belt |
CODONBELT |
Switzerland |
|
29 |
Mould Coil Spring |
TOHATSU |
Japan |
|
30 |
Worm&Worm Wheel |
LIMING |
Taiwan |
|
31 |
Oil Temp.Conditioning System |
WLP |
Taiwan |
|
32 |
Cooling Fan |
SUNON |
Taiwan |
|
33 |
Heat Exchanger |
LEINIX |
America |
|
34 |
Lubrication Pump |
YONGSHENG |
Taiwan |
|
35 |
Encoder |
OMRON |
Japan |
|
36 |
Sealing Ring |
CTY |
Germany |
|
37 |
Frequency Converter |
YASKAWA |
Japan |
|
38 |
Body Material |
Ductile Iron QT600-3 |
Highlights of Automatic Foil Stamping&die Cutting Machine
01
Pneumatic Clutch
The high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.
02
Lubrication System
With a programmable lubrication system, the accurate control of PLC ensures balanced lubrication of the machine.
03
Vacuum Pump
Adopt imported equipment, improve the stability of the machine, low noise, high performance, long service life.
04
Gripper and Chain
The grippers are made of special extra hard aluminum alloy, with anode treatment on the surface, ensuring accurate die cutting and embossing, etc. at high speed. The adjustment mechanism, patent design guarantees very accurate control. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.
05
Electrical Cabinet
Electronic components are all world-famous, high quality ensured.
06
Plates Quick Change Device
Shorten the time for changing Plate, Improve the productionefficiency.
If you want to find a reliable packaging machinery factory, please choose us,and we will be your best partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automatic High-speed Speedwave Folder Gluer Machine | This high speed folder glueris YL series heavy-duty machine, the frame is adopted with 20mm thickened high-quality carbon steel material. Adopt ... |
 |
Double Workshop Carton Forming Machine | Double Workshop Carton Erecting Machine is an automatic machine, specialized in making food cartons, boxes, containers which are made from cardboar... |
 |
Automatic High-speed Speedwave Folder Gluer Machine | As one of the professional packaging machinery suppliers, Our product line covers a wide range of products including die-cutting machine, film lami... |
 |
Packaging Machinery Manufacturer | Our product line contains a die-cutting machine, film lamination machine, folder gluer machine, greyboard slitting machine, paper bag machine, wind... |
 |
Automatic High-speed Window Patching Machine | The automatic High-speed Window Patching Machine is the special equipment for carton box colour box window lamination. They are advanced models in ... |
