IEC 60529 DIN40050 And IP5K0 Dustproof Sand And Dust Test Chamber For IP5X And IP6X
IEC 60529 DIN40050 and IP5K0 Dustproof Sand and Dust Test Chamber for IP5X and IP6X The Dustproof Sand and Dust Test Chamber SC-015 is according to IEC60529,Website:, GB2423.37-89 (Test L: dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps), DIN40050 and IP5K0. The SC-015 is applied in LED or other luminaries for IP5X and IP6X test. ModelNumberWorking Room Size(mm)RemarkSC-500600*700*800Single door structureSC-800800*800*800SC-0101000*1000*1000SC-0151000*1500*1000Cabinet can be put in a horizontal direct or vertical directSC-0201000*2000*1000 • Temperature Range: environmental temperature + 5~50℃ (Adjustable)
• Humidity Range: 45%~75% (Adjustable)
• Metal net standard nominal line diameter: 50μm• Airflow velocity in the chamber: 1.5m/s (adjustable range 0~4.99m/s)
• Environmental air pressure: 85Kpa~106Kpa
• Test dust: dry talcum powder, portland cement, smoke ash and etc.
• Line spacing between the standard: 32μm, 75μm and 250μm (There are three Metal nets)
• Selecting dust concentration control instrument: get sample through the optical principle, show the dust concentration and automatic control powder quantity that entering into the Cabinet according to the concentration of the set: (needed cleaning compressed air source configuration, require the pressure: 1~3 kg/cm3)
• Power supply: 380V 3phases 50 Hz/60Hz
Другие товары поставщика
|
|
|
Thermal Shock Test Chamber Thermal Shock Test Chamber can be used in the temperature shock test and fast-changing temperature test in a wide range ... |
|
|
|
IEC 60529,Website:, IEC 60598, IEC 60335 and IEC 60034-5 Water Ingress Testing Equipment for IPX1 to IPX8 JL-X Water Ingress Testing Equipment is a... |
|
|
|
Fast Photo-Electric LED Lamp Bulb Tester The Fast Photo-Electric LED Lamp Bulb Tester is made up of three main parts: measuring circuit of electric... |
|
|
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester is according to the standard requirement of IEC60695-2-20 and GB4943,Websi... |
|
|
|
Customized LED Integrating Sphere for Optical Measurement Diameter: IS-0.3M (φ0.3m)、IS-0.5M (φ0.5m)、IS-1.0M (φ1.0m)、IS-1.5M (φ1.5m)、IS-1.75M (φ1.75... |
Все товары поставщика
Похожие товары
