Rebar Locator TC100/110 for Concrete Covering Thickness Testing
TC100/110 is used to detect the thickness of concrete covering layer and rebar diameter. Besides, it can detect the location of magnetic substance and electric and electric conductor in non-magnetic and non-conductive medium, e.g. cable inside wall body and water & heating pipe etc. it is a kind of intelligent nondestructive test equipment possessing the functions of automatic detection, data memory and output.
Features
Acceptance inspection of cover after formwork is removed
Locate rebars to avoid them when drilling holes
Provide essential data (location, cover, diameter of rebars) for strength calculations of reinforced concrete structures
Measuring concrete cover thickness
Quality assurance in mass production of fabricated concrete elements
Measuring the thickness of concrete over steel reinforcement and metal pipes
Signal strength bar display and sound alarm for high accuracy
Real time graphic output both to screen and printer
Data processing software compatible with windows 95/98/2000/Me/WT/XP
Auto calibration, correct the system error
Three scan modes for TC110:grid pattern, profile scan and large area scan
For TC110: direct display grid and profile image of rebars
Другие товары поставщика
|
|
Protrudent Design Rockwell Hardness Tester TH300/320 |
Features High accuracy, wide measurement range, automatic loading and unloading of major load Test results display digitally, and can print autom... |
|
|
High Precision Portable Coating Thickness Gauge TIME®2605 for Car Paint |
Features Magnetic induction (F), measuring the thickness of non-magnetic materials (e.g. Paint, plastic, porcelain enamel, copper, zinc, aluminum,... |
|
|
High Accuracy Micro Vickers Hardness Tester TH717 from Reliable Supplier |
Features 20 × lens and a 40 × lens the tester enable a wider measurement field and higher accuracy. Connected to printer and computer... |
|
|
High Quality Spectrophotometer TCR300 for Color Matching |
Brief Introduction Our device adopts internationally agreed observe condition D/8 (Diffused lighting, 8 degrees observe angle) and SCI (specular r... |
|
|
F/N Type Coating Thickness Meter TIME®2510 from Reliable Manufacturer |
Features Two principle of operation are adapted: magnetic induction (ferrous) and eddy current (nonferrous) to take non-destructive measurements ... |
Все товары поставщика
Похожие товары
