Drying Walk In Environmental Chamber

• 

Application
Dry walk in environmental chambers are a special type of walk in environmental chamber specially designed for drying or dehumidification applications. These chambers provide controlled conditions to remove moisture from products, materials or samples. JOEO Drying Walk in Environmental chamber are ideal for automotive, computer, battery, defense and other industries
According to market demand and customer requirements, JOEO has extensive experience in battery testing technology, JOEO has configured dry walk in test chambers for battery production to meet low humidity, such as 5%R.H -10%R.H. A continuously dry indoor climate is one of the key technologies in the production of high-performance lithium-ion batteries for electric drive.If you need more models about our test equipment, please reference our chamber-testing（.）com

DRYING WALK IN ENVIRONMENTAL CHAMBER STRUCTURE
Interior material: SUS # 304 stainless steel plate (1.5 mm thickness ).
Exterior material: cold rolled steel, galvanized anti-rust treatment with advanced resin paint coating.
Insulation material: German Bayer fire-resistant high-strength PU polyurethane foam insulation material +ultra-fine glass fiber.
Heat preservation material: imported rigid rock wool rock wool (CSR 120 k).
In addition, in order to prevent glass frosting when running low temperature, we setup a heating wire inside to get it de-frosting.
Both sides of chamber are equipped with a test cable port with diameter 100mm, the silicon plug is with high low temperature resistance.
Heater: Fin type radiator pipe shaped stainless steel electric heater.

DETAILS FOR DRY ROOMS TECHNICAL
JOEO walk in test chamber reduction of humidity in production facilities is the key to long-lasting and powerful lithium-ion batteries. Dry Rooms with dehumidifier system air in battery cell production to a residual water content of up to 0.001 grams per kilogram of air. This corresponds to a dew point of -70 degrees Celsius. To keep the production climate constant under all conditions, the battery cell production chambers are hermetically sealed off from the outside climate. JOEO Dry walk in environmental chamber first cool down the ambient air in the production area, whereby a large part of the moisture condenses. Second, specially coated drying wheels remove the residual moisture until the desired value is reached. To keep the climate in the drying chamber system constant under all conditions, the system generates a slight overpressure.

Другие товары поставщика

	Horizontal Thermal Test Chamber	Application JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom ...
	PBT20 Pneumatic Bump Test Machine	The PBT20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash benchand is suitable for repeated impacts on electr...
	Humidity Control Chamber	Application JOEOhumidity control chamberare designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-...
	BVS17 Pneumatic Bidirectional Vertical Shock Test System	BVS17 series pneumatic bidirectional vertical shock test system is the novel designed and developed forlarge specimens that cannot or are not easy ...
	Three-Zone Thermal Test Chamber	Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric tem...

Похожие товары

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Продавец: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...