.

Wire Cut - through Tester for Ford Automotive Wires

Applicable Standard:

Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA

Technical Parameters:

1. Sensing method: High - precision load cell (sensor)
2. Capacity: 200KG
3. Cut - through speed: 10mm/min
4. Effective measurement range (%): 0.5 - 100
5. Accuracy class: Grade 1
6. Load accuracy: Within ±1% of the indicated value
7. Display: Controlled and recorded by computer software
8. Equipped with an automatic stop function upon cut - through
9. Overload protection: The machine will automatically activate protection when the load exceeds the maximum by 10%
10. Power system: AC servo motor
11. Fixture configuration: One set of fixtures selected according to the user's product requirements
12. Power supply: AC 220V±10%, 50HZ, 5A
13. Dimensions: 56X80X170cm 14. Diameter of the cut - through steel wire: 0.45mm 15. Cut - through test voltage: Less than 24V


Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Liquid Sustained Combustion Test device
Liquid Sustained Combustion Test device Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...
Textile Fiber Composition Analyzer
Textile Fiber Composition Analyzer Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2...
Office Chair Caster Durability Tester
Office Chair Caster Durability Tester Implementation standards GB/T4085 EN425 Product features 1. The instrument adopts PLC touch screen control, simple and intuitive operation; 2. ...
Wear Scar Profilometric Measuring Instrument
Wear Scar Profilometric Measuring Instrument Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an...
Helmets Vertical SpacingInfrared - positioning Tester
Helmets Vertical SpacingInfrared - positioning Tester Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-20...
Все товары поставщика

Похожие товары

WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android Продавец: China PHONEFIX Technology Co., Ltd Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...
Высокоточный датчик напряжения HCV1500
Высокоточный датчик напряжения HCV1500 Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн...
Xenon Test Chamber
Xenon Test Chamber Продавец: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Продавец: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester Продавец: Qinsun Instruments Co., LTD Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...