The non-contact color measuring instrument

• 

Application Scope

The non-contact color measuring instrument for textiles is suitable for color measurement and management of textile printing and dyeing products such as multidirectional fleece fabrics, lace, patterns, plush, hats, buttons, etc. It features color measurement, color difference comparison, color management, color clustering analysis, and the ability to save, transmit, and share measurement results in image form.

Applicable Standards

ISO 105 A11

Technical Specifications

1. Wavelength range: 400-700nm, at 10nm intervals

2. Light source: LED array multi-spectral light source

3. Light source stability: Within 1% error over 8 hours of testing

4. LED lifespan: Greater than 12,000 hours

5. Color input: Color camera measurement

6. Imaging camera: 3-megapixel color camera

7. Input interface: Imaging camera, LED light box

8. Color spaces: CIELAB, CIELCH, CIELUV, Hunter Lab, etc.

9. Color inputs: Camera measurement, spectrophotometer measurement, manual input of XYZ, LAB values, and spectral data (reflectance)

10. Color parameters: CIELAB color space, CIELUV color space, Hunter Lab color space, Munsell color space, reflectance and transmittance curves, chroma, K/S (dyeing depth), XYZ tristimulus values, optical density

11. Measurement indicators: Opacity, ISO A11 colorfastness to staining and color change, reflectance, Pass/Fail (compliance/non-compliance), lightness, whiteness, CIE hue, yellowness

12. Color difference indicators: Pass/Fail (compliance/non-compliance), color difference value, residual color difference, color intensity, tolerance

13. Illuminant: D65, A, F11, D50, F02, F07, etc.

14. Color rendering index: Ra > 97

15. Supported operating systems: Windows 7, Windows 10, Windows 11 (32-bit and 64-bit)

16. Measurement range: 350mm × 300mm

17. Software language: Chinese and English

18. Dimensions: 873×815×810mm (W×H×D)

19. Weight: 95kg

Другие товары поставщика

	Electrolyte wettability test system	Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ...
	Battery short-circuit tester	The device is designed based on a variety of battery short-circuit test standards. According to the standard requirements, the short-circuit devic...
	Floor coverings flammability tester	Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignition on floor coverings. It can be used for either th...
	Residual Ethylene Oxide Gas Chromatograph	The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica...
	Impact strength tester for car seat launching headrest	Applicable standards: GB 11550-2009"Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the r...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Продавец: China PHONEFIX Technology Co., Ltd	Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...
	Высокоточный датчик напряжения HCV1500	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...