Special Angular Contact Ball Bearing Unit
Special Angular Contact Ball Bearing UnitThere are three types of the special angular contact ball bearing unit produced by our company:· the thin-wall series of bearings with 1 inner ring and 2 and half outer rings;· bearings with 1 outer ring and 2 and half inner rings,Website:, which can be divided into super thin-wall, normal and heavy series;· bearings with 1 inner ring, 1 small and 1 large outer rings, which can be divided into light and heavy series. The bearings are flanged;These bearings are tightly structured, small in size, light, and convenience to be installed and maintained.The light and heavy series are all sealed and lubricated with grease or thin oil. They can be re-oiled. The assembled bearings are O-shaped (DB), and preloaded by the precision lock nuts. They can bear the axial and radial loads at the same time.The thin-wall series of bearings are used in aerospace, aviation and weapon systems; the standard and heavy series are mainly used in the weapon system, as well as the support and transmission of the ball screw shaft in the high-precision NC machine and processing center.
Другие товары поставщика
|
|
|
Induction heatersBearing is difficult to be installed to the shaft,Website:, in the case of interference fit or driving fit. Therefore, the bearing... |
|
|
|
Hybrid Ceramic Ball BearingsHybrid Ceramic Ball Bearings performanceThe inner ring，outer ring and rolling element of bearing are made of high carbo... |
|
|
|
Tungsten Carbide Ball,Website: Ball |
|
|
|
Super-thin Wall BearingThese bearings are normally used in the high-precision platform frame and high-precision swivel table.
Website: |
|
|
|
bearing Performance Fixed-pad thrust Fixed-pad thrust bearing is fixed on the matrix. It can produce oil wedge and get dynamic pressure by very ti... |
Все товары поставщика
Похожие товары
