Lag Screws
1.Technical Parameters and DrawingsHE CodeDimensions(in)Wt./1000ΦDLThreaded LengthkgLS1/4-11/4"1"1" LS1/4-11/41/4"1 1/4" 9.07LS1/4-11/21/4"1 1/2" 9.98LS1/4-21/4"2"1 1/2"12.25LS1/4-21/21/4"2 1/2"1 3/4"14.97LS1/4-31/4"3" 25.40LS5/16-1 1/25/16"1 1/2"1 1/2" LS5/16-25/16"2" 18.14LS5/16-35/16"3"1 7/8"27.22LS3/8-23/8"2" 31.75LS3/8-21/23/8"2 1/2"1 3/4"39.92LS3/8-33/8"3"2"45.36LS3/8-43/8"4" 49.89LS3/8-53/8"5" 63.50LS3/8-63/8"6" 77.11LS3/8-83/8"8" 99.79LS3/8-103/8"10" 122.47LS1/2-21/2"2" 49.89LS1/2-31/2"3" 68.04LS1/2-31/21/2"3 1/2" 86.18LS1/2-41/2"4"2 1/2"90.72LS1/2-51/2"5" 113.40LS1/2-61/2"6" 131.54LS1/2-71/2"7" 181.44LS5/8-55/8"5" 204.12LS3/4-43/4"4" 231.331. Tolerance: ±5% 2. All dimensions are in inch.3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Lag screws have rolled threads and can be wrenched in or driven in. For maximum holding strength, gimlet point lag screws should be installed with a wrench.Material steel is hot dipped galvanized to ASTM A153.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: lag screws, gimlet point lag screw, sharp point screws, fetter drive screwsHS code: 7318190000Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel Q235Finish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 7000 Diameter in: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4,etc.Length in: 1, 1 1/4, 2, 6, 8,10,etc.Thread length in: 1, 1 1/2, 1 3/4,etc.
Другие товары поставщика
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsDesignated size of couplingWt.Rated failure loadABCDΦR(kg)(kN)W-7A701634.519.220160.6970W-7B115... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionPEP11/16Pole eye platesNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked.... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionDimensionsWt.Minimum failing loadABCΦDEFkgkNCE-1Clevis eye.770CE-2Clevis eye.7120CE-3Clevis ey... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsWt./1000ΦDABCkgSN1/41/4"7/32"1/2"7/16"8.00SN3/83/8"21/64"7/8"5/8"11.79SN1/21/2"7/16"1 1/8"13/16... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionWt./1000kgGWT3/8Guy wire thimble 3/8"37.2Notes:1. Tolerance: ±5% 2. All dimensions are in MM ... |
Все товары поставщика
Похожие товары
