Secondary Rack Pole Bands Single Type
1.Technical Parameters and DrawingsHE CodeDescriptionPBS-1Secondary Rack Pole Bands Single TypeNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked. 3. Finish: steel hot dip galvanized per ASTM A153 4. Customized sizes are available at request.2.Product Description:Secondary rack pole bands are produced to joint secondary racks to tubular steel or wood poles.There are two types. Single cup type pole bands are designed to attach one rack.Pole bands are produced in carbon steel SAE 1010 to 1020, hot dip galvanized to ASTM A-153.Pole bands are supplied with 3 carriage bolts, 3 spring washers and 3 square nuts.Carriage bolts are to attach the racks and tighen bands on a wide range of wood or steel poles. The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: secondary rack pole bands single type, pole clamps, one cup clampsHS code: 7326909000Model: SinglePackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: ASTM A536Finish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000
Другие товары поставщика
|
|
кронштейны для крепления силовых трансформаторов |
1.Technical Parameters and DrawingsHE CodeDescriptionWt.kgTMB-1Transformer mounting brackets182.Product Description:Material carbon steel Q345 is h... |
|
|
|
2.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia.Eye size.Length under eyeskgES3/83/8"7/8"×1 1/4"3"0.100ES1/21/2"1 1/4×1 5/8"6"0.295ES5/8... |
|
|
|
1.Technical Parameters and Drawings HE CodeDimensionsWt./1000Hole dia.LengthBolt dia.kgSCW1/29/16"2 1/2"1/2"104.33SCW5/811/16"3 3/4"5/8"453.59SCW3... |
|
|
|
1.Product Description:Lag screw pins are produced for pole and transformer wiring.Forged steel, hot dip galvanized.1" cast lead thread.T he above a... |
|
|
|
1.Technical Parameters and DrawingsHE CodeWt.kgENT5/80.354Notes:1.Tolerance: ±5%2.Producing standard: ANSI C 135.5 3.All dimensions are in MM exce... |
Все товары поставщика
Похожие товары
