.

Automatic sample introducing real time monitor Optimized design Precise result Ash Fusion Tester

SDAF105b Ash Fusion Tester can be used to determine the ash fusibility of coal and coke ash in power plant, coal industry, metallurgical industry, cement industry, paper manufacturing and institutes.High automation, large number of samples/ batch.
①Unique automatic sample introducing/ taking mechanism. Operator only need to take it from the outlet under room temperature.
②9 samples/batch. Fully automatic, test time/batch is 3 hours. Each month (22 working days) 100 samples more than normal tester.
③Applicable to different test atmosphere. Furnace temperature can be up to1600℃, applicable to ash of vast range of coal and coke.
Optimized design, Low operation cost.
①CE certified high definition camera and radiator reduce heat radiation and realize vivid picture and long service life.
②Single layer or multilayer design for graphite cup increase utilization efficiency of graphite or bituminous coal. Test atmosphere in furnace is ensured.
③Anti-overflow slot in ash cone support can store spilled ash cone and prevent ash cone stick with the plate.
④Furnace adopts heat resistant and heat insulation material. Imported material for combustion tube and sample boat.
⑤Heating element by silicon molybdenum rod, resist to high temperature (max. temperature 1800℃), anti-oxidation and low aging.
Real time monitor, Precise result.
①CCD camera real time monitor, new image processing algorithm, quick and accurate analysis of characteristic temperature.
②Manual observing and camera recording of image at the same port. Good air tightness, low gas consumption.
③Gas leakage detection and alarm function make the instrument safe and reliable.
Smart control, easy to operate.
①Friendly interface, easy operation, real time display of image and data; All data can be stored, printed and uploaded.
②Windows-based operation system for fully automated testing.
③Multi-control with CAN bus.
④Balance connection and data transfer with RS232 serial port.
Conformance to Standards
ISO540 (2004) - Hard Coal and Coke – Determination of Ash Fusibility
ASTM D1857 - 04 Standard Test Method for Fusibility of Coal and Coke Ash



Отправить запрос, связаться с поставщиком

Кому: Hunan Sundy Science and Technology CO.,LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Unique sample weighing mode Fully automatic Moisture Analyzer
Unique sample weighing mode Fully automatic Moisture Analyzer SDTGA520 can be used to determine the moisture content in coal, coke and other solid biomass fuel;One batch 20 samples Blast heating way and light ...
Anti-block meahcnism of feeding Easy sample feeding hopper Hammer Crusher supplier
Anti-block meahcnism of feeding Easy sample feeding hopper Hammer Crusher supplier SDHC Hammer Crusher is designed to continuously crush hard material into analytical size. It is widely used in power industry, coal, chemical proce...
Creative sealed type crushing chamber Easy sample feeding Hammer Crusher & Divider
Creative sealed type crushing chamber Easy sample feeding Hammer Crusher & Divider SDHD150 Hammer Crusher & Divider can be used to crush sample into testing or analytical size. It is widely applied in power industry, coal indu...
Unique designed accurate test fully Automatic Isoperibol Calorimeter manufacturer
Unique designed accurate test fully Automatic Isoperibol Calorimeter manufacturer SDACM3100 can be used to determine the calorific value of solid and liquid combustibles such as coal, coke, petroleum oil, cement black meal, bioma...
Automatic sample introducing real time monitor Optimized design Precise result Ash Fusion Tester
Automatic sample introducing real time monitor Optimized design Precise result Ash Fusion Tester SDAF105b Ash Fusion Tester can be used to determine the ash fusibility of coal and coke ash in power plant, coal industry, metallurgical industry, ...
Все товары поставщика

Похожие товары

EQMS-200 VOCs Online Monitoring System
EQMS-200 VOCs Online Monitoring System Продавец: Ханчжоу Zetian Technology Co., Ltd. Overview EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas de...
EM-5P Portable Flue Gas Analyzer
EM-5P Portable Flue Gas Analyzer Продавец: Ханчжоу Zetian Technology Co., Ltd. Overview EM-5P portable gas monitoring system mainly consists of gas monitoring sensors (SO2, NOx...
EM-5Hg Stack Mercury Continuous Monitoring System
EM-5Hg Stack Mercury Continuous Monitoring System Продавец: Ханчжоу Zetian Technology Co., Ltd. Overview Based on cold vapor atomic fluorescence spectrophotometer technology, we have developed ...
EM-5 Flue Gas Analyzer
EM-5 Flue Gas Analyzer Продавец: Ханчжоу Zetian Technology Co., Ltd. Overview EM-5 series flue online gas analyzeris a series of self-developed gas analysis products...
DPM-6000 PM Monitor PM2.5/PM10
DPM-6000 PM Monitor PM2.5/PM10 Продавец: Ханчжоу Zetian Technology Co., Ltd. Overview Inhalable particle content is one of the most important indexes for measuring air qualit...