Signal Conditioner
Universal signal conditioner is used in industrial process control systems. Isolated signal conditionerconnects industrial field instruments and control systems to complete the function of signal matching and conversion. Through reliable isolation technology, the signal conditioning equipmentresists various interference attacks and ensures the stability of the system and instruments in a complex electromagnetic environment. The isolated pt 100 signal conditioner of Chenzhuusing special design achieves anti-interference among power supply, input, and output. At the same time, the signal conditioning module/unit has a strong EMC performance that can work normally even under strong interference.
So far, our signal conditioning isolationamplifier for electronics, as a member of the whole safety automation system, has been applied to tens of thousands of industrial sites. And the stability of the control system escort, possessing the most complete models, has reached the international level. As one of the most professional signal isolator suppliers, Chenzhu promises to provide you good transducer signal conditioning and services! Different types of signal conditionersfor circuits can be offered by us, whether it's based on RTD loop powered digital isolator or DC Pt100 signal splitter, Pt100 signal conditionerwith 4-20mA output current. If you want to know the price of our 5v to 24v PLC signal converter, please contact us as soon as possible. Related sensors and signal conditioning pdf files are also available for you to refer to.
What is the difference between 2-wire transmitter, 3-wire transmitter and 4-wire transmitter?
2-wire transmitter
3-wire transmitter
4-wire transmitter
Four-wire transmitters have their own internal power supply, and they do not need to be connected to a DC power supply. It has two power cords and two current output lines. The output of a 4-wire transmitter is usually a current signal.
FAQ of Signal Isolators
Q
How to distinguish between the active and passive signals?
A
According to whether the signal acquisition loop needs an external power supply,
Active signal：In the 4~20mA signal acquisition loop, the signal generating end has its own voltage drive and no external power supply equipment is needed. This 4~20mA is an active signal. Generally, 4-wire transmitter and 3-wire transmitter output active signals.
Passive signal：In the 4~20mA signal acquisition loop, the signal generating end does not have its own voltage drive and external power supply equipment is needed. This 4~20mA is a passive signal. Generally, a 2 wire temperature transmitter outputs passive signals.
Method of judging whether the external power supply is needed in the signal acquisition loop：
Disconnect the signal acquisition loop, and connect a voltmeter to the two lines of the field device (voltage transmitter). If there is voltage, it means the field device outputs active signals. If there is no voltage, it means the field device outputs passive signals.
Q
Temperature Input Signal Type and Range
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Safety Relay | SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety and automation system. We have over 24 years of exp... |
 |
CZWB Series Temperature Transmitter | CZWB Series Temperature Transmitter The CZWB series is an intelligent digital temperature transmitterdesigned specifically for industrial complexi... |
 |
Antennas And Feeders SPD | Antennas And Feeders SPD Antennas feeders SPD, the coax lightning protectoror coax surge suppressor, is used in the antenna feeder circuit of the ... |
 |
Safety Relay | Automation direct safety relays are mainly applied to the safety control circuit, connecting the safety sensing elements and mechanical equipment m... |
 |
20KA AC Power SPD | SPD 20KAAC Power SPD for AC power; 220VAC, TN system, Single phase; In(8/20us): 10kA/phase, Imax: 20kA/phase; hot-pluggable; fault indication. ... |
Похожие товары
 |
Wiring Harness Connector | Продавец: Aupins Technology Co., Ltd | Connector plugs are used as electromechanical components to connect electrical circuits. AP team ... |
 |
SAE J1772 Charging Connector | Продавец: Aupins Technology Co., Ltd | AP SAE J1772AC EV charging plug conforms to SAE J1772provisions and requirements. It is compatibl... |
 |
IEC 62196-2 Charging Connector | Продавец: Aupins Technology Co., Ltd | AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatib... |
 |
Hyperboloid Contacts | Продавец: Aupins Technology Co., Ltd | The hyperboloid contactsspring terminal is the patented product specially developed and researche... |
 |
GB/T Charging Connector | Продавец: Aupins Technology Co., Ltd | GB/T Charging Connector is widely used in the AC charging system of electric vehicles and conform... |
