.

LSUV-LJ type UV-light irradiation cross-linked cable equipment

LSUV-LJ type UV-light irradiation cross-linked cable equipment

Ultraviolet Irradiation Crosslinking Equipment

Ultraviolet Irradiation Crosslinking Equipment

Application of UV-light irradiation cross-linked equipment

The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing.

UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.

LSUV-LJ type UV-light irradiation cross-linked cable equipment

The UV-light irradiation cross-linked cable equipment is composed mainly of irradiation box, air supply/exhaust fan set, control cabinet and electronic power supply cabinet.

Speed of outgoing line ofLSUV-LJtype irradiation cross-linked equipment



Отправить запрос, связаться с поставщиком

Кому: Xingtai Longjia Electronics Technology Co.,Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Outside Micrometer
Outside Micrometer Outside Micrometer With Electronic Digital Display Outside Micrometer Measure sample size Micrometer with electronic digital display with an accur...
Measurement of specific gravity density of cable material by solid density meter
Measurement of specific gravity density of cable material by solid density meter Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measu...
Wire Winding And Torsion Testing Machine
Wire Winding And Torsion Testing Machine Wire Winding And Torsion Testing Machine aluminium cable steel reinforced Wire and Cable Detection Equipment Wire Winding Testing Machine,Torsio...
Probe Hygrothermograph
Probe Hygrothermograph Probe Hygrothermograph Wire and Cable Peripheral Equipment Applicable temperature range: -10-50℃ Applicable humidity range: 10-99%RH Temperatur...
LH-401B 250℃ Heat Aging Test Chamber
LH-401B 250℃ Heat Aging Test Chamber LH-401B 250℃ Heat Aging Test Chamber cables heat aging test Chamber,plastics heat aging test Chamber It is mainly suitable for the heat aging tes...
Все товары поставщика

Похожие товары

RTDS121C Ceramic Uncooled Thermal Detector
RTDS121C Ceramic Uncooled Thermal Detector Продавец: IRay Technology Co., Ltd. RTDS121C Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VO...
EHS Shore Durometer Hardness Tester Unit
EHS Shore Durometer Hardness Tester Unit Продавец: Mikrometry instruments limited EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester...
EHP210 Leeb Digital Hardness Tester
EHP210 Leeb Digital Hardness Tester Продавец: Mikrometry instruments limited EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for t...
EFGH Advanced Force Indicator
EFGH Advanced Force Indicator Продавец: Mikrometry instruments limited The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide ran...
Signal Input Terminal DZXL-ZL-E-725
Signal Input Terminal DZXL-ZL-E-725 Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD Pakistan Thermal Power Sootblowing Signal Input Terminal DZXL-ZL-E-725 Dongfang Yoyik Engineering...