Beer Aluminum Foil
Technical Parameters Of Aluminium Foil For Beer Sealing:
Alloy State, Thickness, Width, Elongation (%) Tensile Strength, Thickness Tolerance
Aluminum Foil For 8011 Beer Seal O 0.01-0.0115 Mm Over 300 Mm 2-2.5 80-90N/Mm2 < 5
Aluminum Foil For Beer Sealing Has Smooth Surface, Smooth Shape And Few Pinholes.
Aluminum Foil For Beer Sealing Is Mainly Used For Sealing Beer Bottle Mouth Or Printing Beer Trademark.
Appearance Quality Of Aluminium Foil For Beer Sealing:
Aluminum Foil Section Is Neat, Without Cracks, Edges, Burrs, Loose Rolls, Tower-Shaped, Lotus Leaf Edges And Other Phenomena.
Surface Quality Of Aluminium Foil For Beer Sealing:
Aluminum Foil Watches Have No Roll Prints, Black Lines, Highlights, Grinding Wheel Prints.
The Surface Of Aluminium Foil Is Clean, Without Wrinkles, Seams, Scratches, Bright And Dark Lines, Cot Prints, Vibration Marks, Twill Lines, Etc.
Aluminum Foil Surface Has High Flatness And Few Pinholes.
There Is No Oil Stickiness, Yellow Oil Spots And Foaming Phenomenon On The Surface Of Aluminium Foil Products After Combustion Of Lubricating Oil.
Aluminum Foil Packaging For Beer Sealing:
There Are Large Rolls And Wooden Cases.
Packaging Of Large Volume: The Size And Specifications Of Large Volume Are Determined According To The Width And Length Customized By Customers.
Packing In Wooden Cases: Approximate Size Of Wooden Cases: 1.4 Meters Long, 1.3 Meters Wide And 0.8 Meters High. Customers'requirements For The Width And Diameter Of Aluminium Foil Are The Determinants Of The Size Of Wooden Boxes.
Другие товары поставщика
|
|
Thin Section Angular Contact Ball Bearing |
Angular Contact Bearing With Reduced Shoulder On One Side Of Inner Or Outer Race Ball Path. Snapover Assembly Permits Using Of A One --- Piece Circ... |
|
|
slim thin section bearing china kaydon replace |
Precision Engineering Precision Bearings Are Made Of Stainless Steel And Are Corrosion Resistant. Ball Bearings Only 2.5 Mm Wide Have Apertures Ran... |
|
|
RA Cross Roller Bearing |
(Inner Ring Integral, Outer Ring Split, Ultra-Thin)
This Compact Type Reduces The Thickness Of RB Type Inner And Outer Rings To The Limit. It Ha... |
|
|
oil film bearing 172050A 95A |
Oil Film Bearing In The Pre- Finishing, Finishing Mill, Pinch Rolls Are Widely Used, Is The Key To High-Speed Wire Rod Rolling Mill Parts, And Its ... |
|
|
morgan bearing 162250Y |
Size : 130 × 200 × 33 Mm
Weight:3.80 KG
SMS Part Number : F0364022 - 801684 360010
Morgan Part Number: 162250-Y (7126KRD-2/4S)
Used I... |
Все товары поставщика
Похожие товары
