.

Laser Piezo Objective Scanner Micro Piezo Actuator Z Axis Piezoelectric Linear Stage Micrometer

P72 piezoelectric objective scanner is aZ-axis motion piezo positioner specially designed for objective lens focusing microscopy. It adopts africtionless flexible hinge parallel guiding mechanism, with ultra-high focusing stability. The objective positioner is loaded with amicroscopic detection/measurement or observation device to improve accuracy.

Characteristics
- Travel to 100μm
-Load capacity to 0.2kg
- Millisecond response time
-Closed loop for high repeatability

Typical Applications
- 3D imaging
-Interference/metering
-Surface structure analysis
-Confocal microscope
-Biotechnology
-Semiconductor test


Application Example
P72 piezoelectric objective scanner can be used for automatic cell microscopy, cold atom microscopy and so on.

Adapter Compatible
P72 objective positioner is connected to the objective lens through an adapter to quickly make the objective lens in the desired position. Avariety of thread adapters are available, such as M27×0.75, M26×0.75, M26×1/36", M25×0.75, W0.8×1/36", etc., and custom is available.

Small Size, High Dynamics
P72 Piezo Objective Scanner is very compact. Its body uses aflexible hinge mechanism, which is frictionless and has avery high resolution and it can carry 200g load for high-speed precision motion, it has been widely used in optical scanning, confocal microscopy and other fields.

Closed-Loop Step Time
Step time of 30ms at loading 200g to 100% travel.

P72.Z100 Technical Data:

Models Suffix S-Closed loop
Suffix K-Open loop
P72.Z100S
P72.Z100K
Units
Active axis Z
Travel range(0~120V) 80 μm±20%
Travel range(0~150V) 100 μm±20%
Sensor type SGS/-
Resolution 5/2.5 nm
Linearity 0.1/- %F.S.
Repeatability 0.05/- %F.S.
Push/pull force 110/15 N
Stiffness in motion direction 1.4 N/μm±20%
Unloaded resonant frequency 350 Hz±20%
Unloaded step time 10/3 ms±20%
Closed-loop unloaded operating frequency 10% travel 50 Hz±20%
100% travel 15
Load capacity 0.2 kg
El.capacitance 3.6 μF±20%
Material Steel
Mass 150 g±5%

Note: Above parameters are measured with the E00/E01 piezo controller. The maximum driving voltage can be -20V~150V;
For high-reliability and long-term operation, the recommended driving voltage is 0~120V.



Отправить запрос, связаться с поставщиком

Кому: Harbin Core Tomorrow Science and Technology Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Piezo stack actuator with preload 150V driving voltage for precision grind
Piezo stack actuator with preload 150V driving voltage for precision grind Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre...
Piezo actuator with preload optional transfer mode closed loop SGS sensor
Piezo actuator with preload optional transfer mode closed loop SGS sensor Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindricalstainless steel shell. The pre...
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire...
CoreMorrow Усиленные пьезо актуаторы
CoreMorrow Усиленные пьезо актуаторы Усиленный пьезопривод представляет собой привод, который усиливает и выдает смещение, создаваемое низковольтными пьезоэлементами, предварительно на...
Piezo Nanopositioning Stage, Linear Piezo Stage with High Accuracy Positioning Accuracy for Nanopositioning
Piezo Nanopositioning Stage, Linear Piezo Stage with High Accuracy Positioning Accuracy for Nanopositioning Z axis Vertical piezo positioner linear stage with fast piezo focus matching Olympus microscope piezo stage ·Piezo stage ·piezo posi...
Все товары поставщика

Похожие товары

8.0MP 10-40mm Zoom Lens 1/1.8 F1.4 Format Machine Vision Lenses
8.0MP 10-40mm Zoom Lens 1/1.8" F1.4 Format Machine Vision Lenses Продавец: Shenzhen Wikshu Technology Co. Описание Ручной зум 8.0mp C Mount 10-40mm объектив Ручная апертура объектив машинного зрения 1/1....
Mechanic LM3 360° free rotating universal double arm bracket for microscopes
Mechanic LM3 360° free rotating universal double arm bracket for microscopes Продавец: Phonefix Mechanic LM3 360° free rotating universal double arm bracket for microscopes. Mechanic LM3 de...
Fuji Electric FRN5.5VG1S-4 powder inverter
Fuji Electric FRN5.5VG1S-4 powder inverter Продавец: 840499 technical Specification Manufacturer: Fuji Electric Series: FRENIC-VG Model: FRN5.5VG1S-4E Applic...
Microscope Objective Lens
Microscope Objective Lens Продавец: Shenzhen Canrill Technologies Co., Ltd Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity opt...
DMD Lithography Lens
DMD Lithography Lens Продавец: Shenzhen Canrill Technologies Co., Ltd DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufactu...