Shoelace Abrasion Tester / SATRA TM93 / QB/T2226

• 

Standards

SATRA TM93、DIN-4843、QB/T2226、SATRA TM154

Principle

Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.

Product Advantages

Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.

Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.

Quantitative Result: Provides objective data, typically the number of cycles to failure.

Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.

Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.

Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.

Versatile Application: Suitable for testing various types of shoelaces and eyelets.

Product Features

Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.

Mechanism to securely clamp a standard eyelet mounted on a fiberboard.

System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).

Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).

Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).

Controllable test speed (100 ± 5 cpm) for the reciprocating motion.

Touch-screen control interface for setting test parameters and monitoring the test.

Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.

Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).

Robust construction suitable for repetitive abrasion testing.

Application

This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.

Другие товары поставщика

	Stick Slip Test Stand for Material Combinations(G-SSP)	Get a quote： Whats/App: +86 181 0160 0864 The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate friction-induced...
	Nissan Scratch Tester	Get a quote： Whats/App: +86 181 0160 0864 The Scratch Tester is designed to evaluate the scratch resistance of materials such as automotive inter...
	Sole Sand Bath Heat Insulation Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The sand bath component of the Shoe Heat Insulation Tester is primarily used to ev...
	Large Flame Flammability Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flame Flammability Tester is developed according to the NFPA 701 Method 2 and ...
	Rubber Mooney Viscosity Tester 丨Mooney Viscometer	Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...