Thermal Insulation Tester JIS L1018

• 

Meet the standard

JIS L1018.34.1A method/Knitted fabrics test methods, heat retention (constant temperature method)

JIS L1096 8.28.1A method/General fabric test method, heat retention (constant temperature method)

ASTM d1518 / Standard Textile Material Thermal Transmittance

Purpose

Keeping warm is one of the important factors in clothing. This instrument is used to measure the heat preservation characteristics of knitted fabrics, general fabrics, general clothing, non-woven fabrics, quilts, blankets, etc.

The sample is installed on the thermostatic heating body with fake human body temperature, and the heat loss (heat dissipation) emitted by the sample within a certain period of time is calculated, and the heat loss (heat dissipation) emitted by the sample is determined with the naked state without sample on the thermostatic heating body. The difference of heat loss is calculated as the insulation rate. The device is fully upgraded and strictly complies with JIS and ASTM standards.

Features

1. Strictly comply with JIS standards and ASTM standards, excellent reproducibility, through high sensitivity, high speed temperature signal processing, can achieve high precision (power detection time: 0.00005 seconds) measurement.

2. Through the development of a new data processing device, you can see the constant temperature heating element in the measurement on the monitor and determine the room temperature, and it is easy to find the abnormal measured value caused by the change in the room temperature. After the determination, you only need to print out these values. The equipment adopts special software to store various test conditions and measurement data, which is convenient for data preservation and historical data retrieval.

Specification parameters

Thermostatic heating body size: 250 (W) × 250 (D) mm

Constant temperature heating material: special aluminum alloy with thermal conductivity

Heater: thermostatic heating body for insulation test / 40w, protection plate / 80w, bottom plate / 120w

Temperature setting/indicator: digital display / 0 —— 50.0℃ (1 scale 0.1℃)

3 / constant temperature heating body, protection plate, bottom plate

Temperature indicator: Digital display/measurement of indoor (hood) temperature

Power consumption meter: digital power consumption cumulative time meter, power consumption meter (0 —— 1000ma)

Test time setter: Digital / 0-9 hours 59 minutes 59 seconds

Power consumption time meter: Digital display / 0-9 hours 59 minutes 59 seconds

Cover: Transparent acrylic (with front door)/thickness 5 tmm

Dimensions: Measuring Department / 550 (W) × 600 (D) × 700 (H) mm

Control unit / 200 (W) x 500 (D) x 700 (H) mm

Power supply: single-phase AC100V or 220v50/60hz

Другие товары поставщика

	Xenon Test Chamber/weather ometer	IntroductionWeather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal nat...
	Flex Durability Tester	The rubbing resistance tester is a device specifically used to detect the rubbing resistance performance of materials. The following is a detailed ...
	Catheter Friction Tester / Catheter Friction Equipment	Standard YY/T 1536 - 2017 TCAMDI 021 - 2019 Main Uses The catheter friction performance tester is a professional instrument used to detect the ...
	Electro-hydraulic servo dynamic fatigue testing machine	Product Introduction: Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly u...
	Shoelace Abrasion Tester / SATRA TM93 / QB/T2226	Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...