Electro-hydraulic servo dynamic fatigue testing machine
Product Introduction:
Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly used for metal materials and non-metal materials, components, structural parts, standard parts, especially new materials such as ultra-strength steel, titanium alloy and reinforced synthetic fiber and other materials tensile, compression, fatigue, low cycle fatigue, crack growth, fracture mechanics test. The fatigue performance parameters, fatigue life, cyclic elastic modulus and fatigue crack growth rate were measured by symmetric cyclic and asymmetric fluctuating and alternating load cycle fatigue tests.
Standards：
GB / T2611-2007 Tester General technical requirements
GB / T16826-2008 Hydraulic servo universal testing machine
GB 3075 Axial fatigue testing metal
JB /9379-2002 Tension and compression fatigue test machine technical conditions
GB /T228-2010 Metallic materials at room temperature tensile test method
HB5287 Axial Loading Fatigue Test Method for Metal Materials
EN10002 Tensile Test of Metallic Materials
JG 556-2011 Axial Force Fatigue Testing Machine
HG/T 2067- 1991 Technical specifications for rubber fatigue testing machine
ASTM E399-09 Metallic materials Kic standard test for linear elastic plane strain fracture toughness ASTM E1820 2001 JIC test standard for measuring fracture toughness
Performance parameters:
1. Test force:
Maximum static test force (kN) : ±20
Effective measuring range (%FS) : 0.4——100
Indicating accuracy (%) : ±0.5
Maximum dynamic test force (kN) : ±20
Effective measurement range (%FS) : 4——100
Indicating accuracy (%) : ±0.5
Force value resolution: 1/120000
Load sensing element: load measuring force sensor for high stiffness fatigue machine
2. Actuator stroke (mm) : 100
3. Maximum working pressure (MPa) : 21
4. Displacement:
Maximum displacement (mm) : 100
Indicating accuracy (%) : ±0.05
Resolution: 1/120.000
Sensing element: Conventional type: differential transformer type
5. Amplitude (mm) : ±10(frequency 16H)
6. Generator frequency: Hz0.001——100
7. Frequency response range: Hz0.01——60
8. Maximum working frequency for long hours: 6
9. Test waveform: sine, rectangle, oblique wave, triangle, random
10. Counter: 999.999.999 preset |
11. Control mode: test force, displacement, can be smoothly converted
12. Test space:
Net width (mm) : 600
Net height (mm) : 800
Special type: Changes according to user requirements
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Anti-glare Panel Falling Weight Tester JTG/T | Meet the standard GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012 Scope of application The anti-glare board impact testing machine is designed and... |
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The e... |
 |
Shoe Shank Stiffness Tester SATRA TM256 | Standard SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear. SATRA TM194: Dynamic fatigue resistance... |
 |
Bag lifting fatigue testing machine / Bag Fatigue Testing Machine | Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven... |
 |
Industrial chillers | Applicable Standards Industrial chillers adhere to global safety and performance regulations, including: ASHRAE 15(Safety Standard for Refrig... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
