Geosynthetics Bursting Strength Tester ASTM D

• 

Meet the standard:

ASTM D3786-2008.SL/T .etc

Scope of application:

It is used to determine the bursting strength of geotextiles, geomembranes and geocomposite materials composed of geotextiles and geomembranes. The specimen is clamped on the elastic diaphragm, the liquid pressure is applied under the diaphragm to expand the diaphragm and the specimen, and the liquid volume is increased at a constant speed until the specimen is broken, and the bursting strength and bursting degree are measured at this time. In the absence of a sample, the burst strength of the expanded film is measured when it reaches the burst height with a sample, and the difference between the two is the burst strength of the sample.

Instrument features:

Meet a variety of standard requirements of the sample and area, wide range of application;

User-friendly operation interface, touch screen control, digital display, simple and easy to operate;

Supporting professional test system to realize the simultaneous measurement of force value, displacement and time during burst;

Select high-precision sensor, the result is accurate and reliable;

Equipped with professional sample fixture, sample loading is labor-saving, convenient and reliable;

The front of the panel is equipped with an emergency stop button, easy to operate, safe and reliable;

Built-in thermal printer, timely output test results.

Technical parameters:

The test area is 7.3cm2

Pressure rate 10——150ml/min

Tensile strength measurement range and accuracy 0——6000kPa,+1%

Strength fraction 0.1kPa

Maximum bursting height and resolution 35mm,±0.1mm

Power supply AC 220V 50Hz

Overall dimensions 550x400x600mm

Standard configuration:

1. One host

2. One power cable

3. 25 pieces of rubber diaphragm

4. Glycerin 500ml

5. 2 rolls of thermal printing paper

6. 1 wrench

7. Four feet

8. Product packing list 1 copy

9. 1 copy of product manual

10. One copy of product certificate

Другие товары поставщика

	Infusion Pump Flow Rate Tester GB 8368	Compliance Standards GB 8368 - 2018 Disposable Infusion Sets, etc. Main Uses The infusion set flow rate tester is an instrument specifically des...
	Ross Flex Tester / Ross Flexing Apparatus / Flex Tester	Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di...
	G238BB Electronic Crockmeter / Electronic rubbing colour fastness tester	G238BB Electronic Crockmeteris used for testing the color fastness of fabric and leather by dry/wet rubbing.The tester makes the sample repeatedly ...
	Artificial turf wear tester EN 15330	Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st...
	SUGA GX75 7.5kW Xenon Weather Meter	Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...