Geomembrane Environmental Stress Cracking Resistance Tester
Scope of application:
The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. During the test, the dumbbell sample with notch prepared in advance is placed in the thermostatic surfactant under constant load tension, and the fracture time of the sample is measured and recorded. A series of test results under different stress levels can establish a relationship between the stress level and the fracture time on the logarithmic axis.
Meet the standard:
GB/T 17643- Appendix D-2011.ASTM D5397-1999.CJ/T 234- Appendix C-2006.etc.
Technical parameters:
Maximum tensile stress 20MPa
Number of stations 30 can be customized
Water bath temperature range RT——90°C
Temperature control accuracy ±1 ° C
Switch sensitivity 200g
Timing accuracy 1s
Sample thickness 0.75——3mm
Notch depth 20% of the nominal thickness of the sample 6
Power supply AC 380V 50HZ
Overall dimensions 1420x640x1900mm
Weight 380kg
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Geosynthetics Vertical Penetration Tester丨Geotextile Test Machine | Scope of application: Used to determine the vertical permeability of geotextile and its related products under constant water head method. The wat... |
 |
Yellowing resistance test chamber | Durable & Reliable | Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro... |
 |
SUGA U48 Carbon Arc Aging Tester | Main purpose: The Si80 domestic carbon arc aging chamber is a comprehensive climate testing device mainly used to simulate the changes in materi... |
 |
Qinsun UV-master | In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accel... |
 |
SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
